My high beam fuse keeps blowing on my 98+. Is there somewhere that the cable rubs on these bikes that causes the problem? I looked at a wiring diagram, and it seems like all the wires from the front run through one harness. Would that mean the problem with the wire is most likely between the lights and the harness since all of my other fuses are fine?
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
You'll find everything you need here:
CyberPoet's "Motorcycle Headlight Electrical Troubleshooting and Diagnostics - highbeams, lowbeams, etc" - at MotorcycleAnchor.com makers of superior ground anchor security solutions for motorcycles!
Cheers
=-= The CyberPoet
-
It seems that I fixed the problem yesterday. There was a wiring harness behind the front/center part of the fairing that had one connector covered in a white substance. I'm assuming it was oxidation. I scraped it off and reconnected everything. After three different rides (intentionally hitting bumps on the first ride ), it's still working.
Comment
-
Originally posted by midqetsexone connector covered in a white substance.
Cheers,
=-= The CyberPoet
Comment
Comment