My question is, if i have a mechanic do it, would they test it to see if it'll have the low end problem alot seem to have with the stock uncut springs or would they just tune it to idle fine and not ride it? If they don't ride it after a tune then i might as well do the install myself since i wouldn't wanna take it back to them if it had prpoblems
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Um , right (?) . If the shop has a dyno/EGA , ask if they'll check it (SHOULD go without saying , actually) . SOME shops might test ride it . I've heard of some that will . It's easy enough to instally yourself though , then go see a shop with a dyno/EGA .
-
yeah on the dynojet site pdf for the 600 it looked pretty straigh forward as far as the install goes then it said to turn in the fuel screw all the way then back out three turns. What's this i've been told about drilling out the screw though? They talkin bout the caps over the bolts?
Comment
-
Originally posted by redkat06yeah on the dynojet site pdf for the 600 it looked pretty straigh forward as far as the install goes then it said to turn in the fuel screw all the way then back out three turns. What's this i've been told about drilling out the screw though? They talkin bout the caps over the bolts?
As for the turns, turn it down until you feel it just start to seat -- don't force it all the way down -- then start counting turns coming back out.
IMHO:
Install it yourself. It's far cheaper to have someone run a dyno on a bike than to have them do the install as well... I prefer Ivan's over DynoJet's (and over K&N's, which are relabeled DynoJet kits); far more power and crisper response across the board for the 98+ Kat 600's and 750's -- I've installed it in both. I haven't tried FactoryPro kits yet.
KNOW THIS:
with the Ivan's set at his settings, the carbs were spot-on when I got to the dyno and no post-tuning was necessary.
if installing the dynojet kit (or the K&N), keep the stock springs and skip using their included springs.
Cheers
=-= The CyberPoet
Comment
Comment