[moto]

im talking about this part



they obviously arent from the same bike, unless they were changed at sum point between 8600 and 36000 miles

As stated in http://katriders.com/vb/showpost.php...6&postcount=14, they are from two different GSX1100Gs.

Regards,

Derek

[moto]

I have verified that the float needles (and all other parts) are indeed the same for the '90-'97 BST33 GSX600F and the '89-'97 GSX750F carb rebuild kits. I have kits for these models in stock containing a float bowl gasket, float needle, float seat o-ring, cold start enrichment pipe o-ring, vacuum port o-ring, pilot screw o-ring and slide guide o-ring (this last one's not included in kits from other sources), at $15.18 ea. (I managed to lower the price since my last quote).

For the '98-'06 GSX600F I have rebuild kits in stock that contain the float bowl gasket, float needle & seat assembly, needle retainer o-ring, needle jet o-ring, pilot screw o-ring and cold start plunger retaining nut o-ring. The '98-'06 GSX750F kit additionally contains the vacuum port o-ring. Both are $13.58 ea.

Regards,

Derek

[steves]

I have no idea how I missed this, but it's worth a bump for the good info!