Ok..heres the problem.....
First off...it's a 99 GSX600F
One day I noticed my headlight wasn't working....
Checked fuses...good...checked headlight bulbs...good....
After the easy stuff was out of the way...I tore into the harder stuff...
An hour later and the bikes stripped....
With key on...I have power to my fuse box.....
Wires between fusebox and headlight sockets all have good continuity....
All ground wires have good continuity to negative side of battery....
I have power to low beam socket white wire.....but not yellow wire...no power to high beam....
Flip dimmer switch...no power to either low or high....
Broke into dimmer switch....all connections are good.....cleaned up dust and connections and re-assembled.....
Have good continuity between dimmer switch and high beam socket....
Stood there staring at bike for hour scratching my head as to why these headlights are not working....
Finally gave up and tapped into third eye to power low beam side.....at least for now I'm safer...but not happy with rigged job...
Anyone else ever have this problem?
First off...it's a 99 GSX600F
One day I noticed my headlight wasn't working....
Checked fuses...good...checked headlight bulbs...good....
After the easy stuff was out of the way...I tore into the harder stuff...
An hour later and the bikes stripped....
With key on...I have power to my fuse box.....
Wires between fusebox and headlight sockets all have good continuity....
All ground wires have good continuity to negative side of battery....
I have power to low beam socket white wire.....but not yellow wire...no power to high beam....
Flip dimmer switch...no power to either low or high....
Broke into dimmer switch....all connections are good.....cleaned up dust and connections and re-assembled.....
Have good continuity between dimmer switch and high beam socket....
Stood there staring at bike for hour scratching my head as to why these headlights are not working....
Finally gave up and tapped into third eye to power low beam side.....at least for now I'm safer...but not happy with rigged job...
Anyone else ever have this problem?
Comment