Dead spot?

[bishop403]

I have an 02 750 kat and i noticed when i pull the throttle all the way back seems like the power is little better when i release the throttle forward abit.

Is this a dead spot or is this normal?

Also i was thinking of replacing the can only on this bike with a smaller can will i need to jet it?
I will be using the orig header and mid pipe.

[DreKat]

if you keep the headers and mid pipe you wont need to adjust anything.

[bishop403]

Great!! thank you.

[md86]

Your jetting is likely off .

[JokerZwild]

thats all in the needle right Md?

[md86]

thats all in the needle right Md?

More inclined to believe it's the mains , actually ...

[whitecl0ver]

take the K&N out

[Kattie]

I have an 02 750 kat and i noticed when i pull the throttle all the way back seems like the power is little better when i release the throttle forward abit.

Is this a dead spot or is this normal?

Also i was thinking of replacing the can only on this bike with a smaller can will i need to jet it?
I will be using the orig header and mid pipe.

My 90 kat is kind of like that...i noticed it pulls harder thru bottom end if u just roll into the throttle instead of just opening it wide open...but after u tach it up a bit it desnt matter it pulls great...lol...Do my carbs need adjusted..? bc thats what im thinkin.

[scottynoface]

Main jets are the wrong size, I agree with MD.