I need to replce the metal piece under the front headlight of my 2005 600. It holds the little bottom center plastic and the 2 fairings screw into it. I cant find the part number for that piece of the frame. Wasn't there a microfiche thing on one of these sites?
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Are you talking about item 12, 23 or 24 in this fiche file (or item #6?)?
04/05 Kat Fairing install parts
Cheers,
=-= The CyberPoet
__________________________________________________ ________
CyberPoet's Katana Maintence and Upgrade Parts Offerings
The Best Metal Steel Aluminum Motorcycle Tire Valves in the World, plus lots of motorcycle & Katana (GSX600F / GSX750F) specific help files.
-
LOL i just found it on ron ayers. Thanks CP. And it was 12. My welded nuts were rusted and got stripped. Got them off with some heating and roto zip but i bent the piece and cant really get it to fit nice again ... all well2005 600, Chopped Shovel, Smoked Turn Signals and Rear Light, 14/50 Sprocket Change, Lubetronic, Whiteface Gauges, Chrome Reflective Screen, Anodized Bar ends and Levers, Met. z3's and some nuts and bolts!!
Comment
-
Ah, I was going to say they are usually salvagable with some rust remover and a tapping tool (to tap them back to the original thread size unless too much metal rusted away).
Q: Were you using aftermarket fasteners on it? I ask because normally that part does not act as the anode in the bike, which is what tends to cause them to rust when they do...
Cheers,
=-= The CyberPoet
__________________________________________________ ________
CyberPoet's Katana Maintence and Upgrade Parts Offerings
The Best Metal Steel Aluminum Motorcycle Tire Valves in the World, plus lots of motorcycle & Katana (GSX600F / GSX750F) specific help files.
Comment
-
you mean bolts right? lol yea i had an aftermarket bolt kit. Just sucks it's gonna take over a week to get the part..2005 600, Chopped Shovel, Smoked Turn Signals and Rear Light, 14/50 Sprocket Change, Lubetronic, Whiteface Gauges, Chrome Reflective Screen, Anodized Bar ends and Levers, Met. z3's and some nuts and bolts!!
Comment
-
Originally posted by Jhonyquest97 View Postyou mean bolts right? lol yea i had an aftermarket bolt kit.
Originally posted by Jhonyquest97 View PostJust sucks it's gonna take over a week to get the part..
Cheers,
=-= The CyberPoet
__________________________________________________ ________
CyberPoet's Katana Maintence and Upgrade Parts Offerings
The Best Metal Steel Aluminum Motorcycle Tire Valves in the World, plus lots of motorcycle & Katana (GSX600F / GSX750F) specific help files.
Comment
Comment