ok so here's the back story:
i picked up a 93 Kat 600 from a buddy. hasn't been ridden in 8 years. he had it running a year or so ago, but the floats were set wrong so the carbs leak. the carbs were then taken off and he moved from AZ to TN. He gave it to me if i wanted to try and get it running again. we reset the floats, reinstalled the carbs, hooked up the throttle linkage and other little odds and ends. no airbox installed and the fuel tank isnt on. tryed starting it with some ether, but no dice. bike has no spark. I've checked the ohms on the pulse generator, they are at 168ohms, which is within range according to the manual. i got a CDI box from mudbogger that came off a running bike, hooked it up but still no spark. engine cranks freely and has good compression.
any thoughts or links to threads that could steer me in the right direction?
i picked up a 93 Kat 600 from a buddy. hasn't been ridden in 8 years. he had it running a year or so ago, but the floats were set wrong so the carbs leak. the carbs were then taken off and he moved from AZ to TN. He gave it to me if i wanted to try and get it running again. we reset the floats, reinstalled the carbs, hooked up the throttle linkage and other little odds and ends. no airbox installed and the fuel tank isnt on. tryed starting it with some ether, but no dice. bike has no spark. I've checked the ohms on the pulse generator, they are at 168ohms, which is within range according to the manual. i got a CDI box from mudbogger that came off a running bike, hooked it up but still no spark. engine cranks freely and has good compression.
any thoughts or links to threads that could steer me in the right direction?
Comment