Kat 92 600 tranny i think help

[log2024]

hey all i have a 600 92 kat i go for 1 to 2nt if slips in and out of 2nt is that the tranny ? if so can some1 link me a something how to fix it. ty

[tone]

yep its most likely a worn second gear & /or selector fork, not good & not cheap to fix

[log2024]

should i get a new motor?

[arsenic]

yes

[tone]

probably cheaper to get a new motor than to get it fixed if you cant do the work yourself

[log2024]

well i can rebuild car motors so i think i can do a bike tranny i hope. But i can't find any diagrams to fix it. Do you guys or girls know of any links i can goto so i can see what i have to fix?

[mreedohio]

not worth the hassle to fix the tranny, your better off spending 100-200 for another motor and swap it in there. thats what i did when my tranny went to hell, i found another motor for like 160 bucks delivered to my door off ebay and swapped that in.

[Rothman]

not worth the hassle to fix the tranny, your better off spending 100-200 for another motor and swap it in there. thats what i did when my tranny went to hell, i found another motor for like 160 bucks delivered to my door off ebay and swapped that in.

+1

Even if you do the work, the parts for the fix are expensive if you do it rigth and it takes a lot of time to do it. I had the same situation and also bought a new motor.

[loudnlow7484]

well i can rebuild car motors so i think i can do a bike tranny i hope. But i can't find any diagrams to fix it. Do you guys or girls know of any links i can goto so i can see what i have to fix?

I think you'd find that bike transmissions are a little more complicated than ye old 440 or whatever you might be used to working on.

Download a manual (search this site and you will find them) if you're intent on doing it yourself. My advise? Replace the motor. Maybe use this opportunity to go bigger......

[log2024]

ok thanks all i'll try to find a new motor