Hey I did a search but couldnt find any detailed info.
I am cleaning my carbs today as the bike sat a year. I ran carbh cleaner through it but it still runs a bit rough.
The dealer told me to just take the bottoms off and unscrew the large jet on the bottom.
Do you know if this is good enough or should I take the tops off too.
I have rebuilt plenty of four barrels but these are a bit different and I dont want to have to do it over and over. Also if you know of any things NOT to touch because springs will fly or seals may break then please tell me.
If you know of any tuts out there with pics please let me know.
Also I dont want to buy a manual as most of you suggest because I am selling the bike once I get her up to par. Plus there is a ton of info between all of you that I feel im in good hands and im not faint of heart just a newb at motorcycle mechanics.
PS the bike is a 2001 600 katana.
Going to get carb cleaner now and some new bolts for the bowls as suzuki but the originals on INCREDIBLY tight and I had to easy out a couple screws...........SCARY!!! LOL I was bitting my lip hoping I didnt snap off a head, but all went well and there all loosend and waiting for better hex head bolts.
I am cleaning my carbs today as the bike sat a year. I ran carbh cleaner through it but it still runs a bit rough.
The dealer told me to just take the bottoms off and unscrew the large jet on the bottom.
Do you know if this is good enough or should I take the tops off too.
I have rebuilt plenty of four barrels but these are a bit different and I dont want to have to do it over and over. Also if you know of any things NOT to touch because springs will fly or seals may break then please tell me.
If you know of any tuts out there with pics please let me know.
Also I dont want to buy a manual as most of you suggest because I am selling the bike once I get her up to par. Plus there is a ton of info between all of you that I feel im in good hands and im not faint of heart just a newb at motorcycle mechanics.
PS the bike is a 2001 600 katana.
Going to get carb cleaner now and some new bolts for the bowls as suzuki but the originals on INCREDIBLY tight and I had to easy out a couple screws...........SCARY!!! LOL I was bitting my lip hoping I didnt snap off a head, but all went well and there all loosend and waiting for better hex head bolts.
Comment