Is there a 'right way' to do this? What method does everyone use?
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Not really a right way...it's kinda the same question as break in method
But here's how I do it..
1. Using WD-40, a brush, towels...get that chain spankin clean and shiney
2. Ride (easy) for like 3-4 minutes to warm it up
3. Apply desired chain lube
Repeat after 600 miles
Comment
-
Originally posted by kickitjpBut here's how I do it..
1. Using WD-40, a brush, towels...get that chain spankin clean and shiney
2. Ride (easy) for like 3-4 minutes to warm it up
3. Apply desired chain lubeKyle
Comment
-
I use a chain ' wax ' that comes in a spray.Clean the chain thourghly with degreaser or the like,ride around the block to warm chain,hold a towel behind the chain to stop overspray, spray per directions,i think it says ever 1k or so,I will check on the name when i get home,i think its Min wax?
Comment
-
I do a quick ride to warm the chain first. Throw the bike on the rear stand, then clean with Jet A (kerosene). I douse a rag with the stuff, wrap my hand with the rag in it around the chain and spin the rear wheel. use a clean rag to dry the chain, and use chain wax in a spray can to relube while spinning the rear wheel. Let it sit for awhile to make sure it doesn't sling off. I hit all 4 sides of the chain, and do this every 600 miles.Eric
2005 GSX-R 750
Comment
-
And as a reminder, don't clean the chain with a rag when the bike is in gear and running. You may say who would be that stupid....but There was a post floating around last year with pics of someone (not a Katrider) who did and got his hand mangled quite badly.Kyle
Comment
-
I lube my chain after every 300-400 miles or so... of after a real long, hard day of riding. Right after I get back, while its still warm, just stick it up on the center stand, put a rag or towel under the chain so u dont get the spray all over the rims and tires. then just spray the links as you go along spinning the tire slowly, covering every link thoroughly.. then just let it sit and soak in, and ur all set.
Kerosene works well to clean it off too.
I use Bel-Ray chain lube.
Comment
-
Your supposed to do what with the chain????
Same thing here, Spray Chain wax on it after it has warmed up, center stand, bike in neutral (Not running), and spin the rear wheel while spraying. Let it sit for a bit, then off to ride!Kan-O-Gixxer!
-89 Gixxer 1100 Engine
-Stage 3 Jet Kit / KNN Pod Filters
-Ohlins Susupension
-Various Other Mods
Comment
Comment