broken peg bolt

[djturnz]

I was removing the left side peg and it was tight so I used a pipe and it broke off. I don't want to drill it out and mess up the threads because then I would have to re-tap it and probably use a different bolt with a big washer to replace the bracket bolts.

I thought about the reverse drill bits I've heard of but if it is that stuck I'm not sure it would work. any suggestions? There isn't enough sticking out to slot it without cutting the frame.

[ThAzKat]

Spray it thoroughly with a penitrating oil like liquid wrench, let it soak in. Which one is it? You can use the reverse drill bit and walk it out slowly.