i got a 98 katana with full exhaust , factory jet kit and just bought a k&n air filter so what do i need to do or adjust when putting the filter in
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Re: k&n filter
Originally posted by 93katanai got a 98 katana with full exhaust , factory jet kit and just bought a k&n air filter so what do i need to do or adjust when putting the filter in
Depends..............What full exaust are you running? Stock or aftermarket?
And just to clarify, you mean Factory Pro brand aftermarket jet kit?
ANd the K&N.........SU7592?
GO by the directions with the jet kit......they include that set up as an example. If you've already installed the jet kit, you may want to try and adjust your air fule mix screws 1/2 turn out when you and the K&N.....but again, that depends on what setting you were at before!I've owned over 70 Katanas - you think I know anything about them?
Is there such a thing as TOO MANY BIKES?
Can you go TOO FAST on a bike?
Welcome to KatRiders.com! Click here to register
Comment
-
Have you installed the jet kit yet? If not the above will tell you how to tune.
To see how to put it in look below. I used these to put it in my jet kit. I am not sure what main jets you should start with. I think with a full system you should run 120's on a 750 kat. Some else will problably clairfy this. Dont forget to synchronize your carbs when you are done.
Is Effingham a swear word?
Comment
Comment