Is it possible to just pull out the baffle from my stock pipes? Just cut them off and re weld them on so It's a little louder?
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Re: Baffles from stock exhaust
Originally posted by bonstrosityIs it possible to just pull out the baffle from my stock pipes? Just cut them off and re weld them on so It's a little louder?
Cheers
=-= The CyberPoet
-
I have read stories where people take a big screw driver, a hammer and break the welds of the baffles and then remove the baffle plates. BUT, NOT FOR KATS. I read someone doing this with a 996 super hawk. It might work with a kat, and there would be no returning to the way it was after you do this. I have also read about people drilling holes in the baffles to make the exhaust noise louder. I dont know how you would get the metal filings out of the bike. Shopvac?Is Effingham a swear word?
Comment
-
Originally posted by illinoiskatI dont know how you would get the metal filings out of the bike. Shopvac?
Cheers
=-= The CyberPoet
Comment
Comment