Hey all, been a few years! Getting back into the Katana world with an '03 Kat 600. Currently not running as the previous owner let it sit forever. Tore the carbs off, and realized I should probably do a valve adjustment since the history is unknown. Question is, I assume there is a gasket and 4 O-rings under the rocker cover to seal the cover itself, and spark plug tubes. Is there a part number for a set? Can't find anything on Google.
Secondarily, I have the engine-side carb boots and O-rings, carb rebuild kits, an OE air filter, OE spark plugs, motor oil, and a filter, petcock rebuild kit, and a fuel filter, Plus a metric ton of vacuum caps and hose, some brake pads, brake fluid, chain, sprockets, and wheel bearings. Did I miss anything? Any "mandatory" upgrades I should perform while I'm in here?
Thanks in advance, everybody!
Secondarily, I have the engine-side carb boots and O-rings, carb rebuild kits, an OE air filter, OE spark plugs, motor oil, and a filter, petcock rebuild kit, and a fuel filter, Plus a metric ton of vacuum caps and hose, some brake pads, brake fluid, chain, sprockets, and wheel bearings. Did I miss anything? Any "mandatory" upgrades I should perform while I'm in here?
Thanks in advance, everybody!
Comment