alright, whats the deal with these? do i have to drill my swingarm? can anybody post up a pic or soemthing. when i get my swingram back, i'm probably going to install some kind of blue slider for my swingarm. any input on what to get? thanks
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Contact Laura at SpeedWerks.com, I think you might have to use the ones for Bandit or SV's.TDA Racing/Motorsports
1982 Honda CB750 Nighthawk, 1978 Suzuki GS750 1986 Honda CBR600 Hurricane; 1978 Suzuki GS1100E; 1982 Honda CB750F supersport, 1993 Suzuki Katana GSX750FP. 1981 Suzuki GS1100E (heavily Modified) http://katriders.com/vb/showthread.php?t=94258
Who knows what is next?
Builder of the KOTM Mreedohio september winning chrome project. I consider this one to be one of my bikes also!
Please look at this build! http://katriders.com/vb/showthread.php?t=91192
-
Spool sliders are designed to simply thread into the mounts found on most modern sportbikes. Unfortunately, the Katana does not have this mount. You have two choices (one is better than the other):
Option 1: Drill a hole in the swingarm and install a rivet nut to thread the spool slider into. The problem here is that the back portion of the swingarm is hollow and I'd be afraid that it would simply bend if you were sliding on it. It would probably be fine for using a stand.
Option 2: Have someone weld a chunk of metal onto the bottom of the swingarm, then drill and tap that. This will give you a place to mount the spool slider.
Comment
-
There is also a thread of one of the members welding that piece of round tube on to put the spools on Steve. I was looking for it but wasn't able to find it due to not remembering the title.TDA Racing/Motorsports
1982 Honda CB750 Nighthawk, 1978 Suzuki GS750 1986 Honda CBR600 Hurricane; 1978 Suzuki GS1100E; 1982 Honda CB750F supersport, 1993 Suzuki Katana GSX750FP. 1981 Suzuki GS1100E (heavily Modified) http://katriders.com/vb/showthread.php?t=94258
Who knows what is next?
Builder of the KOTM Mreedohio september winning chrome project. I consider this one to be one of my bikes also!
Please look at this build! http://katriders.com/vb/showthread.php?t=91192
Comment
-
I did it. Here is a finished pic of my swing arm with the sliders on and what it took to weld them on. Go to a machinist and have him make the part THEN weld it on. Don't weld on a chunk of metal and try to tap it. That is a lot more work. And before I get a million PMs about this all I did was measure the width of the swing arm for how long the part needed to be and have the shop drill and tap the hole to accept 8mm x 1.25 bolts. That is the standard thread count that every other bike I looked at had.
Comment
-
See, that is some nice work broTDA Racing/Motorsports
1982 Honda CB750 Nighthawk, 1978 Suzuki GS750 1986 Honda CBR600 Hurricane; 1978 Suzuki GS1100E; 1982 Honda CB750F supersport, 1993 Suzuki Katana GSX750FP. 1981 Suzuki GS1100E (heavily Modified) http://katriders.com/vb/showthread.php?t=94258
Who knows what is next?
Builder of the KOTM Mreedohio september winning chrome project. I consider this one to be one of my bikes also!
Please look at this build! http://katriders.com/vb/showthread.php?t=91192
Comment
-
What about drilling a hole in the swingarm and weld the pipe inside it? Just a thought to ponder.TDA Racing/Motorsports
1982 Honda CB750 Nighthawk, 1978 Suzuki GS750 1986 Honda CBR600 Hurricane; 1978 Suzuki GS1100E; 1982 Honda CB750F supersport, 1993 Suzuki Katana GSX750FP. 1981 Suzuki GS1100E (heavily Modified) http://katriders.com/vb/showthread.php?t=94258
Who knows what is next?
Builder of the KOTM Mreedohio september winning chrome project. I consider this one to be one of my bikes also!
Please look at this build! http://katriders.com/vb/showthread.php?t=91192
Comment
-
is that due to clearances??TDA Racing/Motorsports
1982 Honda CB750 Nighthawk, 1978 Suzuki GS750 1986 Honda CBR600 Hurricane; 1978 Suzuki GS1100E; 1982 Honda CB750F supersport, 1993 Suzuki Katana GSX750FP. 1981 Suzuki GS1100E (heavily Modified) http://katriders.com/vb/showthread.php?t=94258
Who knows what is next?
Builder of the KOTM Mreedohio september winning chrome project. I consider this one to be one of my bikes also!
Please look at this build! http://katriders.com/vb/showthread.php?t=91192
Comment
Comment