Blinkers off

[SEQX34]

quick question, i installed an LED and connected it to my signals. for some reason, the LED blinks a little slower than the rest of the signals. i connected the wires by tapping to the existing signal wires. the front and rear signals blink at the same time but the LED is slow. what can i do to correct this? thanks for the help.

[The CyberPoet]

Try disconnecting one of the existing blinker bulbs by removing it from the socket. It sounds as if this particular LED has a resistor pack built into, and if it does, the combined resistance with the two other bulbs in the circuit is enough to slow it.

Cheers
=-= The CyberPoet

[SEQX34]

i'll try that CP. just incase that is whats slowing it down, is there anything i can do to correct this? thanks!