I did something on the cheap. I straightened a bent handlebar, the clutch side myself. It's straight now, but the bike will not start. I get headlights and LEDS to light up and they dim when I hit the start button, but no engine turn over or clicking at all. Did I possiblably mess up the clutch switch? The bike is in neutral. Any advice would be appreciated.
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
Question - Kat will not start or even click after I straightened handlebar?
Collapse
-
Depends on how you straightened the hadlebar. You may have jammed up the clutch safety switch. Reach under there and jiggle it. Might just be loose.ハイどーぞバカ外人!
03 Suzuki Intruder Volusia, 95 Kat 750, 06 Kat 750, 01 Yamaha R6, 96 Suzuki Bandit 750 (Jspec), 04 GSXR 1000, 06 Honda CBR1000RR
メイクショップ 神谷 (2013)
チームのパドック松田 (2014)
US Marine veteran
Semper Fi
Comment
-
Originally posted by dwright View PostI did something on the cheap. I straightened a bent handlebar, the clutch side myself. It's straight now, but the bike will not start. I get headlights and LEDS to light up and they dim when I hit the start button, but no engine turn over or clicking at all. Did I possiblably mess up the clutch switch? The bike is in neutral. Any advice would be appreciated.
Comment
-
Kat will no start no click no sound
I have a 1990 kat 600 it was running good exept for the carbs they were dripping some gas that was until last friday when i tried to start it nothing happended lights work good battery is less than one moth old so I took the battery off to charge it when i put it back and conect the cables I dint hear that click sound that always make when you connect the battery what could be??? any suggestions?? 9sorry about my english)
Comment
Comment