was wondering if someone could help me, in detail, figure the steps needed to polish the swrils out from my tank. I have a handheld polisher and air compressor and many differnt type of polishing liquids and compounds. I also have the Maguires 3 step polishing system. Feed back needed, thanks.
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
i use the three part system with damp cotton terry cloth towels for the cleaner and polish, and for the wax, I use a cotton cloth similar to a tee shirt. slightly damp also.
Just keep working it in a little at a time for each step. keep going back and forth with the curves of the bike. i never wax or polish in circles, and I never let the wax or polish dry. just keep rubbing for a few minutes and then with another clean terry cloth wipe the excess away. take your time and you will see the spider webs disappearing.
-
Leave the polisher on the shelf and do it by hand. My weapon of choice is 3M Perfect-It.
2000 Katana 600
2011 Triumph Sprint GT
__________________________________________
"If the women don't find you handsome, they should at least find ya handy."
____________________________________________
Comment
-
I've had good luck with a Mother's Powerball, my drill, and some Scratch X-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
Comment
-
I use a cyclo-orbital polished with green pads, doesnt matter how long/hard you polish it wont hurt the paint.... The mcguires three step is a good process. The cleaner wax will take out most of the scratches. I prefer to use a micro-fiber towel for both application and removal.Originally posted by arsenic93 octane fuel and K&N pod filters rock.
Comment
Comment