GROUP BUY - Pre-98 Illumiglow Gauges **UPDATED**

[KatBusa]

I'm interested in a set of faces for my 2004 750 kat. But have a question. Is this just the face (as in I need to open the guauge cluster and put it in there) or is this a cluster preassembled.

[guy2600]

I'll take a set for a 750 if I can get them without any logos

[macgyver]

add me to the list 1988 600 kat

[SEQX34]

bamarama are you interested? post up so i can add you to the list. Thanks!

allnitedj72 is your buddy interested also? pls. make sure so we know exactly how many people we still need for the group buy. Thanks!

Heres the UPDATED list (so far we have 13 and we need 25)

Pre 600
seqx34
kickitjp
BearKat
katana_ron
nevanerviss
neoclimber
macgyver
purebordom

Pre 750
ThAZkat
HS2020
lopeha
allnitedj72
guy2600

Come on people, this is what we all been wanting to have and could not find. Now is your chance, I did all the leg work and all you have to do is post up if your interested (dont forget to include 600 or 750 on your post)

BTW! i also need gauges to send them, so if you got one laying around and dont mind sending it to me, PM me and i'll give you my address where to send it. (Speedo, Tach, Both 600 and 750 Fuel gauge) Thanks!

[neoclimber]

I would like a set (speedo+Tach+FG) 1989 GSX600F

[SEQX34]

I like the KAT RIDERS on the tach...it is not overbearing and does not distract from the tach (which is mostly what I look at instead of teh speedo)

I however would like the gas without the Kanji....just the GSXF if at all possible. It's just more sophisticated IMHO. Is that at all possible?

Thanks Paul!

I'm in BTW

i'm 90% sure its possible! how about JP instead of the kanji? (j/k.....but i think its possible for a bit of extra) atleast thats what they say on their website

[Anonymous]

I like the KAT RIDERS on the tach...it is not overbearing and does not distract from the tach (which is mostly what I look at instead of teh speedo)

I however would like the gas without the Kanji....just the GSXF if at all possible. It's just more sophisticated IMHO. Is that at all possible?

Thanks Paul!

I'm in BTW

[SEQX34]

Few questions (answers are probably in the text, but my ADD doesn't allow me to notice them):

Is their a speedo included?

Is the price really 100 bucks?

Thanks,
bama

AROUND $100(not more than $120 is my estimate) for the set (Speedo/Tach and BOTH Fuel gauge for the 600&750) The gauges you see above are my personal design, and how it would look once we get the 25 needed for the group buy. if you want to add your own logo, they can do it for you for a fee ($25/logo). So post up if your interested and dont forget to add +1 and size (600/750)

[bamarama]

Few questions (answers are probably in the text, but my ADD doesn't allow me to notice them):

Is their a speedo included?

Is the price really 100 bucks?

Thanks,
bama

[allnitedj72]

Sweet

Ok, so I'm a noob here, but those are kick butt gauges. I'm interested in a set for my Katana 750. Plus I have a friend with a pre98 600 who most likely would be interested also.

[SEQX34]

I do not have any gauges to send. I sent the ones I had to Chris when he was doing this. I like the Katriders logo on the faces. It looks pretty cool.

I like it too (i put it there duh ) problem is with the biker. they said since its kinda small, the bikers not gonna come out as good (atleast when i photoshopped it, it did) unless someone wants to edit it and make it clearer (maybe Waltari can hint!) as for the gauges, i guess its e-bay again to the rescue (unless someone has one).

[HS2020]

I do not have any gauges to send. I sent the ones I had to Chris when he was doing this. I like the Katriders logo on the faces. It looks pretty cool.

[SEQX34]

Heres the UPDATED list (so far we have 13 and we need 25)

Pre 600
seqx34
kickitjp
BearKat
katana_ron
nevanerviss
neoclimber
macgyver
purebordom

Pre 750
ThAZkat
HS2020
lopeha
allnitedj72
guy2600

Come on people, this is what we all been wanting to have and could not find. Now is your chance, I did all the leg work and all you have to do is post up if your interested (dont forget to include 600 or 750 on your post)

BTW! i also need gauges to send them, so if you got one laying around and dont mind sending it to me, PM me and i'll give you my address where to send it. (Speedo, Tach, Both 600 and 750 Fuel gauge) Thanks!

[SEQX34]

*** UPDATES ARE ON THE LAST PAGE ***
--> Pls. go to the last page to see Updated List and how many more we need. Thanks

OK Fellas we can finally get Illumiglow Gauges (after feeling so left out ) well after tons of countless e-mails to StreetRacerParts and not getting any reply, FUNK Them If they dont want my $$$, I sure dont want to give it to them either! Ok I'll stop my biatchin' and get to the good stuff.

Heres what I got from them -

Hi,

We can add both fuel gauges with each kit. We looked at your logos and found that the KatRiders logo will not show the figure on the bike very well. It is too small to show well. It would show up better to remove the figure on the bike and do text only. Or you could do the KR in the circle as the only text.

The color would be black for the entire logo (depending on color). And yes the logos can be added on the fuel logo instead of speedo (or also on speedo).

Please read our Group buy info below.

Thanks,
Speedhut.com

If you are interested in becoming a Group Leader for your cluster, please read the info below:

*The Group Leader sends a cluster to begin the Pre Order. Please don't use a personal vehicle's cluster (we don't send clusters back). We recommend a cluster from a junkyard (it does NOT have to be in working condition. HOWEVER it DOES need to have everything intact - i.e., needles, cover etc).

Please send the Cluster via Ground (inexpensive) Mail (or another inexpensive method). Please make sure it is INSURED for your protection! *Remember to add your contact information in the package.

Once the cluster has been received the Pre Order will be added to our Model Development Program with the sender listed as the Group Leader. The Group Leader's email will be listed on the site for questions. We will be in contact with the Group Leader throughout the process.

Once we receive 25 Pre Orders we will begin tooling. The Group leader will get their EL-Glo Dial kit for FREE (+ S&H). We offer incentive discounts for the entire Group. *Free Text, Free Standard Graphics, Free Standard Logo's. Custom Logos are $25.00 each. If the majority of the group wants a particular logo it can be included in the group buy at no cost.
*We can add the Km/h version at No additional cost!

The price for our Custom Gauge Kit's are generally around $99.95 + $8.00 US S&H per Pre Order. The price for our Custom HVAC Kit's are $35.95 + $8.00 US S&H.

Thank you for your interest and please email us if there are any further questions.



Thanks,

Speedhut.com team

https://www.SPEEDHUT.com

--------------------------------------------------------------------------------
From: S E Q X 3 4 [mailto:[email protected]]
Sent: Tuesday, March 07, 2006 12:24 PM
To: sales
Subject: RE: custom gauge


HELLO.
Thank you for responding to my mail. The gauges are for a Suzuki Katana (motorcycle). 88-97 Suzuki GSX 600F to be more specific. I had already started a "Group Buy" at an online forum that i am a member at. Its a forum for people with the same bike model (GSXF).
We have over 2,000 members and most are waiting to hear from me for the price and more info. I have some questions about the gauges,

1. the Katana came in two sizes (600cc and 750cc) the picture i sent you before was from a 600, the 750 had a smaller fuel gauge (same size speedo and tach). My question is

a. will you be able to make the 750 fuel gauge too? (i am sure one of the members will be happy to provide you the face plate for it)

b. is it possible to get both fuel gauge (600&750) in the package?(so they can just plug in the correct size gauge whatever size they need)

I went to your web site and used your generic design template, and want to know if instead of the graphics on the speedo, i would like it on the fuel gauge. here is a picture of how i would like it to look

Gas - http://img125.imageshack.us/img125/3131/gas31zn.jpg
Tach - http://img125.imageshack.us/img125/3416/tach25so.jpg

REVERSE White Dial w/ Dark Blue Eurostyle Font

As for the logos, this is the design I sent them (click on the link above or the thumbnails here)

GAS (day) -->

Gas (night) -->

TACH (day) -->

TACH (night) -->

SPEEDO (day) -->

SPEEDO (night) -->

Like what they said above, the logo for the tach has problems (i'm thinking of just going with "KatRiders.com") i cant think of anything else to put there, so if you got ideas, speak up and we can all decide on it. Question:

should we just put the kanji/GSXF on the tach for both 600 and 750? and the KatRiders.com on the gas?