headlights are stock H4 style bulbs.
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
See My Garage for mods...
T-Rex Racing framesliders install and review thread
Full Post 98 LED conversion how to thread
-
Originally posted by Bigyellowkat View Postsorry to necor this thread but do these LED's just plug into the stock connectors? Im looking at changing the parking light this winter along with HID's so the colour matches a bit better
Comment
-
Jay is using LEDs designed to replace the stock bulbs.-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
Comment
-
Originally posted by steves View PostJay is using LEDs designed to replace the stock bulbs.
What Steve said.
As a note, let me add something here... the FRONT turn signal socket leads on the posts are REVERSED polarity, so you either need to cut the wires and splice in reverse, or carefully use a needle, and pop the leads out of the connector plugs, and reverse.
incandescent bulbs arent polarity sensitive, LED ones are.. so the fronts will not work until you splice or swap the leads in teh connectors.
See My Garage for mods...
T-Rex Racing framesliders install and review thread
Full Post 98 LED conversion how to thread
Comment
-
Originally posted by djdaredevil View PostThanks for writing this up just finished the instrument cluster on my 01 750 and it looks sweet.
Just one small correction in the light count
1 red (oil)
3 green(Neutral and turn indicators)
*4* blue SMD for gauges(sorry, i forget exactly)
1 blue STD power for high beam.
Comment
-
FWIW I used #t10 wide-angle convex single LEDs in my cluster and they work fine with where i have them positioned and light the cluster evenly.Black & Blue - Kludge Fixed Katana - 1990 Katana GSX-600F [out of service - engine swap started 9/8/12; ETA 9/30/12]
Beaten and bruised, clawing its way back from the dead for the 3rd time. 2-up tourer
2001 Buell Blast 515cc, V&H Exh, Buell Pro-Series Intake, Stage IV Jetting, Raptor II Streetfighter Front Headlight/Fairing Assembly, Dual HIDs -- "The Misfit"
Comment
-
Originally posted by 89gsx750 View PostAre all these bulbs the same in the pre kat? Seems like most of these mods are done on post bikes? I would like to do mine since i have all the gauges out at the time. but want to make sure of the part numbers and stuff before i start?
no idea, sorry, sure on the brake light and turn sig bulbs, but instrument cluster, you need to find out what # bulb they are and match em up.
do a search to find out what bulb they are
See My Garage for mods...
T-Rex Racing framesliders install and review thread
Full Post 98 LED conversion how to thread
Comment
-
Originally posted by Aaron-71 View PostSo let me get this straight...
Order the LED bulbs, and it's all plug-and-play?
They all just fit directly into the stock bulb harness (my bike is full stock)?
yes, that was the entire point of this thread. no custom one off modifications needed
well, aside from swapping the polarity of the front turn sig wires, a Suzuki mistake, which doesn't matter if using incandescent bulbs.
See My Garage for mods...
T-Rex Racing framesliders install and review thread
Full Post 98 LED conversion how to thread
Comment
Comment