I tried to take pics as well as possible, but apparently its difficult to get focused pics in the dark
theres another thread around for the cluster conversion using the blue #194 SMTD high power LEDs for the backlighting, a green for the Neutral indicator, blue for the highbeam, and red for oil.
the cluster pic
please note: LEDS REQUIRE PROPER POLARITY on install, and thats trial and error. connect cluster and insert each LED to make sure before reinstalling cluster fully!!!
I used a 37LED Tower type 360 degree LED 1157 brake light from pep boys :
marker lit:
Brake lit:
6led white #194 for the plate light:
same 6LED #194 for the parking light
rear 15LED radial amber 1156 at flash:
same 15led radial amber 1156 in front "smoked clear" turns
all bulbs aside from the 1157 Tower bulb were purchased from Superbrightleds.com ... oddly, in the ONLY useful purchase from PEP BOYS.. the 1157 tower bulb was from there.
also, to make the LED turns blink correctly, an LED turn flasher was installed. I disconnected the integral flasher in the flasher diode unit using the flasher diagram in the servicemanual, and connected the new flasher to the leads... similar to this link
