If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I'm a cheeeeep a$$ so I'm going to try and make my own lowering links. I just need to know if i'm lowering my bike 1.5 in does the links need to be 1.5in shorter than OEM?
2k6 Kat factory blue and white, lowered, mesh mod, shovel chopped, polished clutch and brake levers,V&H ss2r slip on, home made intagrated tail light, polished lips, 8k hid's and Joe's 40 led kit. All done by me learned from Katriders thanks.
thanks for the info. got one almost built.I went 1/4inch longer hole to hole. found out the torch is not my friend I suck at using it. Things went much better with the die grinder with a cut of wheel.
2k6 Kat factory blue and white, lowered, mesh mod, shovel chopped, polished clutch and brake levers,V&H ss2r slip on, home made intagrated tail light, polished lips, 8k hid's and Joe's 40 led kit. All done by me learned from Katriders thanks.
Hrm... I've been looking at getting an adjustable set of links.
Not the solid ones with multiple holes, but the fully adjustable threaded ones. I've seen several options for the various SS bikes, but still looking for someone that offeres links for the Kat. Might have to make some.
Well I would love to hear from them about how they are working, what they did, how they look, so on. Being able to change it on the fly seems like a great option.
Well I would love to hear from them about how they are working, what they did, how they look, so on. Being able to change it on the fly seems like a great option.
Krey
Here is how they look.
Of course the ends are now gold cad plated and the sleeve is 304 stainless.
Hey Tmod that makes two of us I would like to know how much they would set me back also.
2k6 Kat factory blue and white, lowered, mesh mod, shovel chopped, polished clutch and brake levers,V&H ss2r slip on, home made intagrated tail light, polished lips, 8k hid's and Joe's 40 led kit. All done by me learned from Katriders thanks.
I have them, and actually finally just got the bolts for them on Friday. I haven't had time enough to get them on the bike yet. M14x140mm bolts are what it too to get enough thread all the way through the links and sleeve on the swingarm. I'll get some pics of them on my spare swingarm monday put up so you all can see how they are going to work, then I'll get them on the bike itself. Can't wait!!
Comment