Ad Widget

Collapse

Announcement

Collapse
No announcement yet.
X

Frame sliders For Pre98

Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Frame sliders For Pre98

    Looking for a set but none work with the Pre98. I have seen some people here who have them and shot them an email with no reply so here it is to everyone. How does one install these? What do you do about the fairings? Thanks for the help!
    Nik
    88 Katana GSX600F, 19k miles, Total Custom- Soon to be revealed!!!!!!!

  • #2
    Re: Frame sliders For Pre98

    Originally posted by CrazyMedic
    Looking for a set but none work with the Pre98. I have seen some people here who have them and shot them an email with no reply so here it is to everyone. How does one install these? What do you do about the fairings? Thanks for the help!
    Nik
    Nik, got your e-mail. sorry couldnt get back sooner (been busy). for the sliders, you can get your answers here:

    http://www.katriders.com/forums/view...945&highlight=

    somebody else might chime in with a different method/opinion, so you decide hope that helps you out! let me know if ya need anything else
    PAUL
    93 GSXF6 PIX.

    "Opinions are like A$$holes, Everybody has one"

    Comment


    • #3
      How did you get the fairing so tight on there? That is a precise cut. Looks really good! Thank you for the link.
      Nik
      88 Katana GSX600F, 19k miles, Total Custom- Soon to be revealed!!!!!!!

      Comment


      • #4
        Originally posted by CrazyMedic
        How did you get the fairing so tight on there? That is a precise cut. Looks really good! Thank you for the link.
        Nik
        Carefull cutting, and not drinking at the time
        Kan-O-Gixxer!
        -89 Gixxer 1100 Engine
        -Stage 3 Jet Kit / KNN Pod Filters
        -Ohlins Susupension
        -Various Other Mods

        Comment


        • #5
          linky doesn't work?
          Current Bike: 2005 SV1000S K5 Red, 7,xxx miles, Hot Bodies Double Bubble Tinted Screen, Hot Bodies Fender Eliminator, Pirelli Diablo Rossi's, LED Flush Mounts, Front/Side/Rear Sliders, PC-III USB, K&N Air Filter, aTRE Mod, TechSpec Tank Grips, Solo Seat Cowl, Corbin Seat, HEL SS Brake/Clutch Lines.

          Working on installing: TPS mod

          Anyone who loves their bike uses Rotella T6!

          Comment


          • #6
            http://www.whaccessories.com/SuzukiK...ccessories.htm
            Chrome Project Part 1
            http://www.freewebs.com/mreedohio/

            Chrome Project Part 2

            http://katriders.com/vb/showthread.php?t=91192

            Chrome Project Part 3
            http://katriders.com/vb/showthread.php?t=91192&page=30

            Chrome Project Finished
            http://katriders.com/vb/showthread.php?t=107586

            Comment


            • #7
              Originally posted by brentwoodkris View Post
              linky doesn't work?
              3 year old links rarely do..

              Comment


              • #8
                cough...anything cheaper?
                Current Bike: 2005 SV1000S K5 Red, 7,xxx miles, Hot Bodies Double Bubble Tinted Screen, Hot Bodies Fender Eliminator, Pirelli Diablo Rossi's, LED Flush Mounts, Front/Side/Rear Sliders, PC-III USB, K&N Air Filter, aTRE Mod, TechSpec Tank Grips, Solo Seat Cowl, Corbin Seat, HEL SS Brake/Clutch Lines.

                Working on installing: TPS mod

                Anyone who loves their bike uses Rotella T6!

                Comment


                • #9
                  make your own and thats it
                  Chrome Project Part 1
                  http://www.freewebs.com/mreedohio/

                  Chrome Project Part 2

                  http://katriders.com/vb/showthread.php?t=91192

                  Chrome Project Part 3
                  http://katriders.com/vb/showthread.php?t=91192&page=30

                  Chrome Project Finished
                  http://katriders.com/vb/showthread.php?t=107586

                  Comment


                  • #10
                    There was a guy on here selling frame sliders that were supposed to work for both pre and post but the requirement for pre was to cut into the fairings to create the hole for them to fit through.

                    Comment


                    • #11
                      Thats me
                      www.scrmotorcycles.com www.katanaOutlet.com
                      Katana Frame Sliders
                      The only fully tested and proven Katana sliders Rear sliders, 520 conversion, gas caps and more.
                      98+ Slider are "CyberPoet Endorsed" R.I.P.
                      I couldn't have done this without you.

                      Comment


                      • #12
                        Braun,
                        I went to your site and I don't see any sliders for the pre's. Do you still make them? If so, what will a set of them run me in dollars?
                        Current Bike: 2005 SV1000S K5 Red, 7,xxx miles, Hot Bodies Double Bubble Tinted Screen, Hot Bodies Fender Eliminator, Pirelli Diablo Rossi's, LED Flush Mounts, Front/Side/Rear Sliders, PC-III USB, K&N Air Filter, aTRE Mod, TechSpec Tank Grips, Solo Seat Cowl, Corbin Seat, HEL SS Brake/Clutch Lines.

                        Working on installing: TPS mod

                        Anyone who loves their bike uses Rotella T6!

                        Comment


                        • #13
                          he doesn't make sliders for a pre. All his sliders are for 98+, BUT they will work on a pre, you just need to modify the fairings.

                          Comment


                          • #14
                            I AM TRYING TO PURCHASE A P.O.S. PRE 98 TO DO SOME TESTING ON AND PERFECTING THE SLIDER DIRECTLY FOR THE PRE 98. iF I DO NOT PURCHASE IT I HAVE A COUPLE PEOPLE WILLING TO LET ME USE THERES, DOWN SIDE I CANT DO PHYSICAL TESTING.
                            www.scrmotorcycles.com www.katanaOutlet.com
                            Katana Frame Sliders
                            The only fully tested and proven Katana sliders Rear sliders, 520 conversion, gas caps and more.
                            98+ Slider are "CyberPoet Endorsed" R.I.P.
                            I couldn't have done this without you.

                            Comment


                            • #15
                              Let me know if you get anything worked out, as I'll be really interested when I tear my bike apart for painting/cleaning/maintenance/mods this winter! Thanks!
                              Current Bike: 2005 SV1000S K5 Red, 7,xxx miles, Hot Bodies Double Bubble Tinted Screen, Hot Bodies Fender Eliminator, Pirelli Diablo Rossi's, LED Flush Mounts, Front/Side/Rear Sliders, PC-III USB, K&N Air Filter, aTRE Mod, TechSpec Tank Grips, Solo Seat Cowl, Corbin Seat, HEL SS Brake/Clutch Lines.

                              Working on installing: TPS mod

                              Anyone who loves their bike uses Rotella T6!

                              Comment

                              Working...
                              X