Okay guys, after arfully studing and looking at all the bodt work forums. I decied to try this painting thing again. My first rattle can job was okay. But for mechanical reasons, my bike needs to be looking better than it was. I was almost embarassed to go any place with it. Sanding priming painting. Also for the newbies such as myself. Decal removal we all know sucks. I found a great solution to the great decal debate....ACETONE
I used a old shop rage, soaked it in this stuff, layed it across my decals for a little over 3mins and it peeled off so easy it was beautiful.
Warningon leave it on the plastic longer than that because it will buckle the clea under the decal!!!
Didn't really matter though since I was taking it down to the bare platic. Just a little heads up for everyone...
Stay tunned for further pics!!!
I used a old shop rage, soaked it in this stuff, layed it across my decals for a little over 3mins and it peeled off so easy it was beautiful.
Warningon leave it on the plastic longer than that because it will buckle the clea under the decal!!!
Didn't really matter though since I was taking it down to the bare platic. Just a little heads up for everyone...
Stay tunned for further pics!!!
Comment