After months of bust-assin-hell on this infernal machine it's finally finished...well pretty much. Still some detail and finer points to work out but for the last two days I've been riding non stop. After about 8 months of it being down it's sooooo freakin nice to be able to just get on and ride, and it's running great and idling perfect for the first time in a long time. Here's a "short" list of the work I did to it:
-Custom 4-2-1 exhaust that I welded myself including a D&D slip on from an 02 R6, it relplace the 4-2-2 with dual mufflers that I had before.
-custom tail section and undertail
-Hand made LED brake/Tail lights
-custom LED undertail lighting
-custom LED engine and front fork accent lighting
-swingarm mounted liscence plate with LED plate light mounted in the tail section so that there are no wires around the plate or swingarm. It's very bright and, surprisingly enough, legal.
-Re-covered black leather seat
-custom fabricated mirror mount
-aftermarket grips installed
-frame sliders from an 04 CBR
-completly customized front end conversion with upper fairing and headlight from an 04 Gixxxer 600. Windsheild and headlight were blacked out and driving lights were added in the ram air ducts. It was sooooo much fun getting this to fit on the bike
-flush mount turn signals mounted on new upper fairing
-Gloss black dupont chromabase two stage basecoat/clearcoat paint job...sprayed by myself.
Well that's what I can think of off the top of my head, on to the before and after pics yyeeeaahhhhhh...
Front end...
Side shots...
Some more pics...
-Custom 4-2-1 exhaust that I welded myself including a D&D slip on from an 02 R6, it relplace the 4-2-2 with dual mufflers that I had before.
-custom tail section and undertail
-Hand made LED brake/Tail lights
-custom LED undertail lighting
-custom LED engine and front fork accent lighting
-swingarm mounted liscence plate with LED plate light mounted in the tail section so that there are no wires around the plate or swingarm. It's very bright and, surprisingly enough, legal.
-Re-covered black leather seat
-custom fabricated mirror mount
-aftermarket grips installed
-frame sliders from an 04 CBR
-completly customized front end conversion with upper fairing and headlight from an 04 Gixxxer 600. Windsheild and headlight were blacked out and driving lights were added in the ram air ducts. It was sooooo much fun getting this to fit on the bike
-flush mount turn signals mounted on new upper fairing
-Gloss black dupont chromabase two stage basecoat/clearcoat paint job...sprayed by myself.
Well that's what I can think of off the top of my head, on to the before and after pics yyeeeaahhhhhh...
Front end...
Side shots...
Some more pics...
Comment