[Rok_Stars_Bars]

I used some high temp stuff from WalMart & Home Depot to hold mine.

Seems like I recall a member actually using velcro, so the mesh could easily be removed for repairs.

As for holding the mesh in place while the glue dries, I used canned goods. Worked like a charm.

Great Idea, Cans I didn't think of that.

The Black looks good on your bike.

I used clear epoxy when I did mine. Wasn't hard at all. After taking the plastics off, just had to cut the mesh a bit bigger than the opening, then bent, shaped, and snipped the ends to perfection. Used a brick to hold the mesh in place, then glued with epoxy and let dry.

I used clear Jb weld to held it in place I got the 5 min cure stuff. We use the red RTV on door seal on the airplanes at work so I knew that stuff was the Sh**. So I finish it off with the red stuff for the best bond

[johna600]

i used 1 min jb weld.. fyI it takes about 2 and a half min.

[Rok_Stars_Bars]

Liquid Steel and Liquid Nail are 2 completely different things

Sorry to disappoint you, it was liquid Nail I got the sh** at wal-mart in a tan squeeze tube.

[bubba]

Sorry to disappoint you, it was liquid Nail I got the sh** at wal-mart in a tan squeeze tube.

Yeah, Liquid Steel is a putty, i got it from wal-mart also near the JB Weld. Comes in about a 4 inch tube. U mush it between ur fingers and then form it to the way u want it then stick the mesh down onto it and let it harden.

[scottynoface]

instead of painting the exposed sealer black, why not just use a sharpie? same effect and cheaper than paint

[aepimp04]

Looks awesome, Nice work!

[inthad]

good mod

[FASHER]

I'm wondering if I should paint mine black? :

[CenCalKat]

Your bike is looking good Storm! Once we get those clear lenses on it will look sweeet!

[#1 Moses]

You Guys Know Permtex makes BLACK silicon on a big caulking tube that fits in a caulking Gun.

[kauweboy]

killer Love the look can.t wait to do mine!!

[xxxkat]

Did this mod to mine today...

[jcv400ex]

Anyone do this to a pre-98? I've been thinking about doing it to mine when I take the tank off for painting.

[bubba]

Anyone do this to a pre-98? I've been thinking about doing it to mine when I take the tank off for painting.

yeah it can be done to a pre