I was wanting to know what the best way to remove the paint from just the outer edges of the rims would be. I still want the paint to stay on from the inner lip to the center of the wheel. I just want the outer edge to be polished so it looks close to chrome. Thanks
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Get some masking tape (Painters tape), and mask off the area where you do not want to loose any paint. Then go and get you some aircraft paint stripper and have at it. Spray it on, let it sit for a bit, then scrape it off using something along the lines of a body filler kife (Flexable rubber basically). Easy as 1,2,4!!!Kan-O-Gixxer!
-89 Gixxer 1100 Engine
-Stage 3 Jet Kit / KNN Pod Filters
-Ohlins Susupension
-Various Other Mods
-
Yeah, brake fluid likes to eat paint.
The aircraft stripper works really well. You can get it at painters supply shops. Some advice while using it is wear rubber gloves, wait for the paint to start bubbling and use a scotchbrite pad to remove the paint. That stuff is nasty to breath too. Wear a mask, or at the least work outside in a well ventilated area.Eric
2005 GSX-R 750
Comment
-
yeah i bought a bunch when working on the camaro from eastwoodco.com that stuff will eat it off. Use gloves unless You like the burning sensation.
(like duff does when he urinates. )Help Support Katriders.com via Motorcyclegear.com
"That whenever any form of government becomes destructive to these ends, it is the right of the people to alter or to abolish it, and to institute new government, laying its foundation on such principles and organizing its powers in such form, as to them shall seem most likely to effect their safety and happiness." - Declaration of Independance
Comment
-
well im just saying that cuz ive done it, ah polish you can pikcu p some the best stuff that i like and have used when detailedcars for almost 3 years now, is Eagle 1, they are little cotton chunks/balls/ and you just use thoes with nothing else, and ill take all the fine impurietes out and make it shine like a MOTHA lol
Comment
-
Originally posted by AHFI really wouldn't mess with sanding if you're just doing the lips. They're already smooth (although a couple of people have complained about ridges??) and if you just strip the paint they should look great. $.02Kan-O-Gixxer!
-89 Gixxer 1100 Engine
-Stage 3 Jet Kit / KNN Pod Filters
-Ohlins Susupension
-Various Other Mods
Comment
-
PM me for Ultrasonic Carb Cleaning, pilot screw o-rings and washers and mercury refills
Harley Davidson
The most efficient way to turn gasoline into noise without the biproduct of horsepower
Comment
Comment