On there site they show a picture of a bike with there undertail installed. The piece looks great! There were two thing that i didnt see on the bike which was a license plate and the back handle pillion! Does anyone here have this installed on there bike and have any pics? I have a 2002 750 and would really love to install this on my bike.
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
What I noticed was it didn't have any rear signals in the pic...I bought one from one of the Ebay auctions they had up under "ArtFibras" I believe was the Ebay Name...In the Ebay Auction it says it comes with a license plate bracket and they come painted to your choice of color. Mine should be here within a few days. As far as the signals go I think im gonna go with the Clear Alternatives Integrated Brake light and signals on mine...On the '02 Kats i don't know what could be done without making a bracket for the signals to hang off.
BTW i tried ordering off their website...got no response from them though so I got it off Ebay.
I'll take some pics of mine when i get it and post them up for you.
Mark
-
-
Originally posted by TurboRangerSVOAs far as the signals go I think im gonna go with the Clear Alternatives Integrated Brake light and signals on mine...On the '02 Kats i don't know what could be done without making a bracket for the signals to hang off.
Comment
-
Originally posted by tazHow are you integrating your tail light? you only have one bulb on the '02. I thought it was just the '04 models and up with the busa style tail that could be integrated.
Comment
-
Originally posted by TurboRangerSVOOriginally posted by tazHow are you integrating your tail light? you only have one bulb on the '02. I thought it was just the '04 models and up with the busa style tail that could be integrated.
Comment
-
Ok Guys...I got my Undertail Tuesday and put it in last night. It took some time to get it but then again it was shipped from Brazil (24 days). It looks fairly well made although the instructions are a bit on the optimistic side in stating it can be installed in about an hour. The paint was a near perfect match that they had painted it with. The license plate/signal bracket they give you is a bit on the flimsy side especially with the stock signals on it, but once I get the integrated taillight and signals it will look a lot cleaner. The hardest part about installing it is drilling the holes in the undertail to match the mounting holes in the frame. You just have to take your time and measure twice...drill once..lol. Overall though, as long as you take your time, It will turn out good....and will look a lot better than the stock fender does. Here's some pics of it all done:
Comment
-
The only other thing I didn't like about the undertail was it gets rid of the "luggage bar" that was on the underside of the rear. Thats what I always used to lift the bike up on the center stand. Now i'll just have to use the left passenger foot peg to lift up on. One other thing, if you have a Two Brothers High mount exhaust you will have to make an additional hole in the undertail for the exhaust mounting bracket to slide through.
Comment
-
The instructions weren't real clear on the installing part.....basically said put undertail where stock fender was mounted...mark holes and drill...I know the 2 front bolts that held the old fender up are located under the side fairings, so removing those would be a big help...thats about as in depth as the install instructions go...after that its "To re-assemble, reverse disassembling instructions". So the best advice i can give if someone gets one of these is to take your time...do it right and have patience.
Comment
Comment