Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
This is a sticky topic.
X
X
-
Originally posted by router99 View Posthi, somebody told me that you can put any suzuki bikes part on another suzuki bike. Is it possible to put 2002 gsxr body and engine onto katana 1997 750cc
Leave a comment:
-
Originally posted by router99 View Posthi, somebody told me that you can put any suzuki bikes part on another suzuki bike. Is it possible to put 2002 gsxr body and engine onto katana 1997 750cc
as for the rest im sure it can be done with mods obviously, unfortunately i do not have much experience in the matter, only what i have picked up from being on here
Leave a comment:
-
hi, somebody told me that you can put any suzuki bikes part on another suzuki bike. Is it possible to put 2002 gsxr body and engine onto katana 1997 750cc
Leave a comment:
-
hey guys, quick question. i am trying to fix up my bike i got some plastics, and i am missing some bolts. do you think it is worth it to get a whole fairing bolt kit and replace all of them or should i just get some bolts from a hardware store. if so what size bolts and everything would i need for it.
and i know there is a post somewhere about this but i couldnt find them.
i think im leaning towards the whole kit, cuz they will be all chrome, rather than painted and they will match.
thanks in advance
Leave a comment:
-
so what would be the best tail for a 05 kat if i want to do a fender eliminator?
Leave a comment:
-
HEy there guys, I am new here, and am looking to do some mods to my '06 Kat. I am wondering what all is interchangable though and also what years. Is anything interchangable from the gsxr to the gsxf? I have searched and searched, but found few aftermarket fairings or anything really for my gsxf600. If anyone can give me advice, please do. Thanks guys and the site looks good.
Leave a comment:
-
Check...
Got a tweaked piece of plastic? Some roughed up paint? Here's the place to get some tips on repairing your Suzuki Katana.
or,
Got a tweaked piece of plastic? Some roughed up paint? Here's the place to get some tips on repairing your Suzuki Katana.
or,
Got a tweaked piece of plastic? Some roughed up paint? Here's the place to get some tips on repairing your Suzuki Katana.
These will have your answers for how to repair.
Krey
Leave a comment:
-
anybody know where you can get the belly fairings for the post98 my bike fell over in my garage onto a cinder block and broke the back corner of the belly fairing off as well as the mounting tab on the main fairing on that side,or would it be easier to fiberglass the back side and epoxy the front sand it down again and paint it.I had just gotten done painting the bike.Paint hadn't even cured yet been sitting about a week when it fell over.aaarrrrg man this sucks
Leave a comment:
-
Originally posted by MyzticMike View Postok so im new to the kat scene but in two weeks im going to get my kat painted and i want to get a seat cowl for it but i cant find one any where its an 04 600 and i know theres alot more better questions out there so my bad but i hope some one can help thanks!!!
Krey
Leave a comment:
-
ok so im new to the kat scene but in two weeks im going to get my kat painted and i want to get a seat cowl for it but i cant find one any where its an 04 600 and i know theres alot more better questions out there so my bad but i hope some one can help thanks!!!
Leave a comment:
-
Originally posted by Kreylyn View PostI'd love to see a mock up of how you would integrate the post tail with the pre front fairings...
Leave a comment:
-
Originally posted by Blazerzr2 View Postthe thread diff is 1mm. the shoulder is larger. i went from 750 to 600 using 750 hardware. perhaps arsenic will jump in here with exact measurments, but trust me, the 750 bolt will not just slide into the 600 frame, and the bearings are differnet as well.
The sleaves the bolt are inserted through are different part numbers, so I'd bet that is where the difference is made up for the bolts also being of a different size. They must have different IDs.
Krey
Leave a comment:
-
Originally posted by Kreylyn View PostSo we are talking a 1mil difference?... no wonder I didn't notice, as that really isn't much.
So much so that the bearings in the swingarms are exactly the same. So even swaping arms, you could just use the 3 sleaves and bolt that go with the bike with np, and not drill the hole.
I'd love to see a mock up of how you would integrate the post tail with the pre front fairings...
Krey
Leave a comment:
-
Originally posted by Blazerzr2 View Postpart #'s, notice the difference.
90 600= 61211-19C00
93 750= 61211-20C00
So much so that the bearings in the swingarms are exactly the same. So even swaping arms, you could just use the 3 sleaves and bolt that go with the bike with np, and not drill the hole.
Originally posted by Alex_750 View PostI've often thought about doing a tail swap on my Pre 750, but I think if I was going to go to the trouble of welding the rear subframe, I'd go all out and install an 03+ tail section.
Krey
Leave a comment:
Leave a comment: