Rear fender eliminator

[ZukiFred]

How dificult is it to instal a rear fender eliminator kit? Where would be the best place to get one?

[WildKat]

you get fender elims off ebay, just do a search on em..or better yet, get ahold of special K..that way you know what your getting will be good quality and will be the right item.

its not hard to do at all, and looks sweet. there are several threads in here with pics of members who have done them and their experiences.

[ZukiFred]

Checked ebay, none for kats.

[Malloc]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4521042169&rd=1&sspagename=STRK%3AMEWA%3AIT

http://www.bikepartsforyou.com/Suzuki.htm

[ZukiFred]

Thanks for the info. Very much apreiciated.

Malloc,
Are you the one that went down last night. If so I hope your doing well. hope you didn't get hurt to bad.

[SweetLou]

You know, the easiest and cheapest way to do it is to just tack a dremmel with a cutting disk or a hawk saw, and cut it off yourself, then get hold of Special K, and get a Creese Bracket from him. That way you will have that clean look, for cheap too!

He also has the Mini-Stalk turn signals, for a even cleaner rear end look.

[ZukiFred]

Thanks for the idea. I even have the mini stalk turns already.

[irenekat]

if you wanna do it the cheap way, hack it off. i used a box cutter..it's cleaner than a dremmel =) good luck with it and post some pics when you're done

[rockadaous]

creese is the way to go

[Malloc]

Thanks for the info. Very much apreiciated.

Malloc,
Are you the one that went down last night. If so I hope your doing well. hope you didn't get hurt to bad.

yes i did go down somone poor'd about 15 feet of sand in the turning lane , im ok just a little sore and my back is hurt from the fall

[ZukiFred]

Thanks for the help everyone. I sent Special K a pm. just waiting to hearback from him. I will defenatly post more pics when finished, I only have pics of one side of my kat, and they aint even the good side.

[WildKat]

Kats only have good sides, so you'll be ok ! good luck with it !!

[ZukiFred]

I can admit when I'm wrong. And you are right!!!!!!!
Thanks.

[SweetLou]

Also, a friendly reminder, Jim will be releasing his all new undertail soon, so you may want to hold off for that as well!

[tzortn]

Also, a friendly reminder, Jim will be releasing his all new undertail soon, so you may want to hold off for that as well!

True, but is it for a 98+ bike?