Carb Cleaning

[Sasquatch]

Hey all, I don't do rebuilding, or jet kits, but I do clean carbs really well (I do ask that you degrease/degunk them first if you can).

Here is a set of carbs from a Katana I did (I do the rails and linkage, powder coated, included in the price).

Sorry for crappy pic quality, but I took them with my cellphone (my normal cam is in the shop for a defective CMOS)

before and after:

[overboost07]

ooohhh shiny!!!!!

[GytRDunKat]

Very nice! Lay off the heavies a bit, k brother?

[Kat96]

Pretty..

[kevin2502000]

I would say those look clean......

[mreedohio]

whats thats service run?

[mcmahonm]

Marc,

I see your work continues to be great, keep it up.

[wismo]

Those are clean.. How long does it take to get that done from the time you get the carbs i would also like to know pricing Thank you.

[Sasquatch]

Price depends on the carb setup, but I did those for $75 ($15 per carb, and then $15 for powder coating the rails and linkage, including return shipping). I can have a set cleaned, and the rails/linkage pc'd in about 2-3 hours and back in the mail.

1 day turn around (if I get them monday, they are shipped out tuesday).

[ITS_NOT_A_KNIFE]

is this just an outside cleaning or both inside and outside, plus PC?

[justinboyce]

looks good

[Staerke]

Price depends on the carb setup, but I did those for $75 ($15 per carb, and then $15 for powder coating the rails and linkage, including return shipping). I can have a set cleaned, and the rails/linkage pc'd in about 2-3 hours and back in the mail.

1 day turn around (if I get them monday, they are shipped out tuesday).

Let me get this straight...I can get my carbs professionally cleaned and powder coated for under $100?
I might just take you up on that...i'll be in touch.

[steves]

Let me get this straight...I can get my carbs professionally cleaned and powder coated for under $100?
I might just take you up on that...i'll be in touch.

I think what he's saying is, that you can send him the parts... he can blast/dip them and PC them or whatever... but does not do the rebuilding.

[Sasquatch]

I think what he's saying is, that you can send him the parts... he can blast/dip them and PC them or whatever... but does not do the rebuilding.

Correct. I will not take them apart, I will not rebuild them. I just clean them, and powder coat the linkage and rails.

is this just an outside cleaning or both inside and outside, plus PC?

I do insides too, anywhere I can reach :

eg:

[JokerZwild]

OOooOoo very nice!