Tools for oil change?

josepaz2 · 08-31-2006, 03:09 AM

I want to do my own oil change for the first time this weekend, and I was wondering if someone could provide me with a list of all of the tools that I will need before I get started. If you could also give me a price that I should expect to pay to buy it, that would be great too. I don't have any tools besides screw drivers so I'm expecting to spend a bit of money here unfortunately. It's about time I start to buy my own tools though.

Thanks alot! This will save me a lot of time from many trips to the hardware store.

Regards,

Jose

brooder · 08-31-2006, 03:24 AM

Torgue wrench - through Sears its $30 for a beam type and $60 for a clicker type. Do a search for the virtues or evils of each.

19mm socket (I believe) - I got mine for $3 at NAPA.

Oil filter wrench. You can also use a strap kind.

Oil drain pan.

4mm hex bit to remove the bottom fairings.

Drain pan, cat litter, and rags (if you're like me at all)

Now I would be slacking if I didn't mention the Fumoto oil drain valve at www.fumoto.com. It's part F111 and it'll have you trouble down the road.

I'm sure if I missed something, someone will chime in.

SEQX34 · 08-31-2006, 07:11 AM

I got all that stuff, so if $$$ is a little low, you are more than welcome to use them. call me if you want to use them. are you back in the city this weekend?

**ZukiFred** · 08-31-2006, 07:23 AM

http://www.motorcycleanchor.com/kata.../oilchange.htm

08-31-2006, 03:09 AM	#1
josepaz2 Rookie Join Date: Jul 2006 Location: Chicago Posts: 54	Tools for oil change? I want to do my own oil change for the first time this weekend, and I was wondering if someone could provide me with a list of all of the tools that I will need before I get started. If you could also give me a price that I should expect to pay to buy it, that would be great too. I don't have any tools besides screw drivers so I'm expecting to spend a bit of money here unfortunately. It's about time I start to buy my own tools though. Thanks alot! This will save me a lot of time from many trips to the hardware store. Regards, Jose

08-31-2006, 03:24 AM	#2
brooder Hey yous guys! Join Date: Nov 2005 Location: Davenport, IA Posts: 3,739 eBay ID: brooder13	Torgue wrench - through Sears its $30 for a beam type and $60 for a clicker type. Do a search for the virtues or evils of each. 19mm socket (I believe) - I got mine for $3 at NAPA. Oil filter wrench. You can also use a strap kind. Oil drain pan. 4mm hex bit to remove the bottom fairings. Drain pan, cat litter, and rags (if you're like me at all) Now I would be slacking if I didn't mention the Fumoto oil drain valve at www.fumoto.com. It's part F111 and it'll have you trouble down the road. I'm sure if I missed something, someone will chime in. __________________ Pain is just weakness leaving the body. -Unknown Author The quarrels of lovers are the renewal of love. -Terence

08-31-2006, 07:11 AM	#3
SEQX34 Kat Daddy Join Date: Nov 2004 Location: Niles IL. Posts: 1,083 eBay ID: mer-mer2b KOTM Oct 2007	I got all that stuff, so if $$$ is a little low, you are more than welcome to use them. call me if you want to use them. are you back in the city this weekend? __________________ PAUL 93 GSXF6 PIX. "Opinions are like A$$holes, Everybody has one"

08-31-2006, 07:23 AM	#4
ZukiFred Put a stick in it. Supporting Member Join Date: Jan 2005 Location: Gray Court, South Carolina Posts: 113,493 October 05 KOTM	http://www.motorcycleanchor.com/kata.../oilchange.htm __________________ Help Support Katriders.com via Motorcyclegear.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How do i change the oil? and wat kind of tools do i need?	jin suk park	Mechanics 101	7	10-11-2007 08:29 PM
is strictly neccesary change the oil filter evry oil change?	jesbel	Mechanics 101	19	02-21-2007 11:48 PM
tools needed for a chain/sprocket change?	donalson	Mechanics 101	12	08-08-2006 11:24 PM
Oil Change Tools Question...	skasner	Mechanics 101	3	07-15-2005 04:25 PM