My Project GSXR PIC HEAVY!!! - Page 9

cintidude04 · 03-28-2012, 06:08 PM

Altering the intake and exhaust I would suggest a power commander. Although I'm sure you could get away without it.

Psycho1 · 03-28-2012, 08:06 PM

You may be able to have the stock computer tuned, without having to buy the PC. I know the 04/05 is programmable, just not sure about your year. Sin could tell you for sure.

Pa Kat · 03-28-2012, 08:48 PM

Okay, so I'll first check into a stock air filter 'till I can come up with the money for a PC or to have mine tuned. Thanks for the info guys.

scottynoface · 03-28-2012, 09:09 PM

Quote:

Originally Posted by Psycho1

You may be able to have the stock computer tuned, without having to buy the PC. I know the 04/05 is programmable, just not sure about your year. Sin could tell you for sure.

I've never heard of a bike from the big 4 having a tunable ECU stock. I know on the Kawis you have to replace with race ECU ($700) then buy the USB cable ($300) to have a timing and fuel adjustable, factory, non piggyback control unit.

Not saying I dont believe you, just that I've NEVER heard of that...

Pa Kat · 03-28-2012, 09:12 PM

SNF, I'm GUESSING the PC is a bit cheaper than the above?

scottynoface · 03-28-2012, 09:19 PM

Quote:

Originally Posted by Pa Kat

SNF, I'm GUESSING the PC is a bit cheaper than the above?

PC is $300, I've just never heard of a bike with a stock ECU that is programmable for new fuel maps. Not saying there isnt, just that Im not aware of it. I dont pay much attention to Suzukis though

As for a Kawi, its not even close, the PC and Ign module are cheaper than the Kit ECU.

That said, I would much rather have the Kit ECU than the piggyback BS

Pa Kat · 03-28-2012, 11:12 PM

Noted. I'll start checking into them when the funds start building back up. 'Till then, I'm going to get some EXPENSIVE paint, sand everything with 80 grit and hit it to see what it'll look like.

scottynoface · 03-28-2012, 11:13 PM

Quote:

Originally Posted by Pa Kat

Noted. I'll start checking into them when the funds start building back up. 'Till then, I'm going to get some EXPENSIVE paint, sand everything with 80 grit and hit it to see what it'll look like.

Make sure you get some printer paper to minimalize overspray

GSXFJim · 03-28-2012, 11:17 PM

Quote:

Originally Posted by scottynoface

Make sure you get some printer paper to minimalize overspray

printer paper?.. meh.. too expensive...

wax paper rolls from the dollar store FTW...

92GSX750 · 03-28-2012, 11:41 PM

Quote:

Originally Posted by scottynoface

Make sure you get some printer paper to minimalize overspray

03-28-2012, 06:08 PM	#81
cintidude04 Kat Legend Supporting Member Join Date: Jul 2010 Location: Vagabond Posts: 5,502 iTrader: (24) My Garage eBay ID: cintidude04	Altering the intake and exhaust I would suggest a power commander. Although I'm sure you could get away without it. __________________ DISCLAIMER-Everything I say is my personal opinion and should be considered fact. "...have you checked out my build thread? cheapest thing I've done to my bike was buy it ..." http://katriders.com/vb/showthread.php?t=111130 www.lunchtimecigar.com

03-28-2012, 08:06 PM	#82
Psycho1 Titanium Butt Join Date: May 2008 Location: Rock Hill, SC Posts: 3,166 iTrader: (0) My Garage	You may be able to have the stock computer tuned, without having to buy the PC. I know the 04/05 is programmable, just not sure about your year. Sin could tell you for sure. __________________ John, '05 GSXR750, '86 FZX700 Fazer, sons bike '93 GSX-R750w

03-28-2012, 08:48 PM	#83
Pa Kat "Stabby" Supporting Member Join Date: Jun 2009 Location: Woodland, Pa. Posts: 1,317 iTrader: (17) My Garage eBay ID: Brendon800	Okay, so I'll first check into a stock air filter 'till I can come up with the money for a PC or to have mine tuned. Thanks for the info guys. __________________ "* JayBell notes that this appears to be a UNscheduled hazing of Mike "Looseplugs McStabbyfoot" Fitzpatrick" '93 Katana 600________________\| 2002 GSX-R600. Rustoleum Cobalt Blue Metallic___\| Flat Black. Smoke WindScreen_____________\| Undertail by...Dunno. Post exhaust swap_____________\| Pilot Power 2CT tires. POR-15 Sealed Tank____________\| Yoshimura TRS Exhaust MoPowerSports Fairing Bolt Kit____\| Blue LED's in cluster Conti Road Attacks FP Shift Kit Bandit tensioners Cheriff Bar Ends Homemade fender eliminator 200+ Joe Florida LED's in blue

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My 88 600 project(pic heavy)	Jarvo	Street Fighters	51	04-17-2013 09:52 AM
New Pics of the GSXR - Pic heavy	Pacerman	Pics and Flicks	31	06-26-2010 03:14 PM
What Do You Guys Think Of THIS? GSXR 1100/ 1000 PROJECT	StevieB	Suzuki Katana Talk	6	01-29-2009 10:21 PM
Project Snakebitten is Done! (Pic Heavy)	Lifeguard326	Suzuki Katana Talk	30	11-10-2008 10:58 AM
GSXR / GSXF Slip on Conversion Project.	BobKat2002	Mechanics 101	8	06-23-2005 12:18 PM

03-28-2012, 09:12 PM	#85
Pa Kat "Stabby" Supporting Member Join Date: Jun 2009 Location: Woodland, Pa. Posts: 1,317 iTrader: (17) My Garage eBay ID: Brendon800	SNF, I'm GUESSING the PC is a bit cheaper than the above?

03-28-2012, 11:12 PM	#87
Pa Kat "Stabby" Supporting Member Join Date: Jun 2009 Location: Woodland, Pa. Posts: 1,317 iTrader: (17) My Garage eBay ID: Brendon800	Noted. I'll start checking into them when the funds start building back up. 'Till then, I'm going to get some EXPENSIVE paint, sand everything with 80 grit and hit it to see what it'll look like.