Parting out. 96 600 parts

[MotoKatana]

Hello all. Trying to get rid of these so pm me if interested.

Also, looking for a post sprocket cover. Any available?

From a 96 Katana 600
A complete 88-97 engine with bad compression. (minus the engine boots and oil pan)

From a 04 Katana 600
A 98-06 choke cable
A 98-06 exhaust header
A 98-06 rear shock absorber
A 98-06 oil pan
A 98-06 air box (no air filter)
98-06 engine/carburetor boots

[92xjunker]

You have a pre motor and a post motor, neither have the sprocket cover, pre will fit a post, just a different color. FYI

[MEngineer]

Possibly interested in post oil pan and header. With those then I would have to find a post oil pickup and I can run it on my pre?

[arsenic]

You have a pre motor and a post motor, neither have the sprocket cover, pre will fit a post, just a different color. FYI

The pre and post sprocket covers are two different things. A post sprocket cover has a spot for the speed sensor, a pre does not.

Possibly interested in post oil pan and header. With those then I would have to find a post oil pickup and I can run it on my pre?

correct

[MEngineer]

Yep. I'm interested. Shoot me a PM with prices?

[MotoKatana]

You have a pre motor and a post motor, neither have the sprocket cover, pre will fit a post, just a different color. FYI

Sprocket cover doesn't fit. There is a post up here somewhere about it. I tried for a while before doing the research

[Jae_Rex]

Left and right upper front fairing?

[R0v3R]

If the guy above doesnt need them anymore (if you have them) I'm in need of one RH front fairing

Also, I would be interested in the clutch and clutch cover if its functional. If not I would still be interested in the clutch cover.