1988 suzuki katana 1100

[DangerousBreed]

WHATS GOOD FELLOW RIDERS THIS FEODOR JOHNSON FROM MN ST.PAUL LOOKING TO EXPAND MY KNOWLEDGE AND EXTEND ANY HELP AND INFORMATION I CAN LEND I BRIEFLY WENT THREW THE FORUM AND NEED TO GO DEEPER IM INTERESTED IN EXTENDING MY 1100 WITH THE FATBOY TIRE BIGGER SPROCKETS I HAVE A VANCE AND HINES DRAG PIPE AND HEADER ON HER RIGHT NOW DONT EXACTLY KNOW IF THATS THE RIGHT MOVE I WENT FROM 112.5 TO 122.5 JETS RAISED THE NEEDLES I WANT TO KNOW THE EASIEST DO IT YOUR SELF WAY FOR FENDER ELIMINATOR IV STRIPPED HER DOWN AND LOST ABOUT 70 POUNDS OFF HER WEIGHT GETTING CLIP ON HANDLE BARS DROPPING HER 1" TO 1-1/2" AFTERMARKET SPEEDO AND TACK ECT... SO IF ANY OF YOU GENTLEMAN OR LADIES KNOW WHAT DIRECTION I SHOULD GO LET ME KNOW THANKS WHERE IM AT IN MN I CAN TAKE HER TO THE INDIAN DEALER AND HAVE HER DYNO'D FOR 20 BUCKS ALSO I CAN FIND ANYWHERE I CAN LOOK UP HEADERS AND PIPES FOR HER YOSHIMURA VANCE AND HINES ALL HAVE NO OPTION FOR THE 1100 WTF ONLY THE 650 IDK PLEASE HELP THANKS

[gsxkat1100]

Why are you yelling?

[maniac1886]

[JIB]

Welcome. I had an 88 1100 for a while

[Wild-Bill]

Welcome. There's this key on the left-hand side of your keyboard labeled "Caps Lock". Please press it.

[shpielers]

Welcome.
Kinda hard to find exhaust systems for the 1100s anymore. They were made once upon a time, but when the bike itself has t been made in 20 years...supply dries up.

Ida thunk running jets that big would have made things way rich. Have you had it dyno'd at the place you mentioned with that set up?

GSFXJim (member here) makes custom sprockets so if you want to go super big on those, you'll want to sent him a PM.

[KatanaGSX92]

Welcome to KR!

[Taybiker]

Hi, welcome