Does anyone happen to have the dimensions including size of the shoulder for the carb diaphragm cover bolts for an 02 600 please?
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Originally posted by Seft View PostDoes anyone happen to have the dimensions including size of the shoulder for the carb diaphragm cover bolts for an 02 600 please?
I do know I always replace all of them with standard metric hex socket or dome caps 16mm long. The shoulder isn't necessary. Pretty sure that's a 4mm sized screw.
Anyways, pic of one and I can pull it out for a full on measurement.
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
-
Originally posted by Kreylyn View PostAnyways, pic of one and I can pull it out for a full on measurement.
Krey
Comment
-
Originally posted by Seft View PostPart 31 from here, https://www.oemmotorparts.com/oem5.a...2=SU4_-2043283 they're round head shoulder bolts, a few were a little worse for wear when I did the carbs so put them back with a little copper grease but want to replace with hex shoulder bolts.
Anyways, here is the measurements...
Krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Comment
Comment