[Kreylyn]

It won't stay hooked, as soon as I sit down it unsnaps. Funny thing is I bought another OEM seat and it does the exact same thing. If anyone has any tricks or suggestions I'd love to get it fixed. It seems as the seat pan flexes too much too stay put.

Take the seat off, and snap some good pics of the bottom of the seat, and the bike. Might be something like missing rubber stoppers (at either location)...

My seat was always very tight (to the point one of the catches on the seat has deformed now).

Krey

[squiggy]

WEIRD! I didn't even notice that, GOOD EYE! Actually there is 3 of me, one is upside down........

[GSXF 600 Guy]

Very clean bike!

[Kfreak]

Looks good. Decals, all you need is decals. That will take it back to stock and look really good.

[kevin2502000]

Looks good. Decals, all you need is decals. That will take it back to stock and look really good.

I'm thinking of only a "S" for each side of the tank, I like simple.

[kevin2502000]

Take the seat off, and snap some good pics of the bottom of the seat, and the bike. Might be something like missing rubber stoppers (at either location)...

My seat was always very tight (to the point one of the catches on the seat has deformed now).

Krey

Here are both stock seats I have, should be able to save it and zoom in if you need too.

[Kreylyn]

Back of the seats look fine. Do you have the rubber stoppers like on the seat, only right at the battery box on the frame of the bike?

Krey

[kevin2502000]

Back of the seats look fine. Do you have the rubber stoppers like on the seat, only right at the batter box on the frame of the bike?

Krey

Nope, nothing but the metal rings. You have a picture?

[Kreylyn]

Nope, nothing but the metal rings. You have a picture?

Couple of pics that were not meants to capture what I was talking about, so keep that in mind...

First pic, far lower right hand side. By the battery, you can see one of the rubber stoppers (looks just like the ones on the seat).




Different angle, pretty dark up in that corner, but there are 2 stoppers, one on each side of the batter closer to the tank.



If those are missing, the pan might be bending just enough to cause the end to pop up on you.

krey

Nother pic, much easier to see them...



Krey

[kevin2502000]

I am missing those, thanks, I'll have to figure something out to replace those.

[Kreylyn]

I am missing those, thanks, I'll have to figure something out to replace those.

Pretty sure they are just a couple of bucks each at the dealer...

Krey

[joseph2027]

hey why is there no oil in the sight glass? but looks good any way

[kevin2502000]

hey why is there no oil in the sight glass? but looks good any way

There is, it's new oil and very clean

[ckholloway]

Looks nice..

[mrwhipper]

Very Nice! A+