I am not sure if anyone has posted anything like this but I couldn't find anything like this other than after pix from Madkatter. Which was a huge help. So I thought I would make a thread of a quasi "walkthrough". I just want to post one warning before anyone tries this, Don't cut plastic with a dremmel in your underwear! hot plastic on the inside of your legs hurts. LOL Ok back to it if anyone has any thing to add that I missed feel free to help me out here. The only tools you need for this is simply a Dremmel or comparible tool, if you want a real smooth finish your cuts then I suppose you could use some sand paper as well. This is an easy money saver for the DIYers that want a fender elim kit. Ok so here we go.
First your just gonna make a rough cut to get the shovel out of the way (using a cut off wheel on your dremmel)
DSC00744.JPG
DSC00745.JPG
DSC00746.JPG
DSC00747.JPG
DSC00750.JPG
Now your gonna make a more precise cut be careful on this one you dont wanna go to deep.
DSC00752.JPG
then hit it with a sanding bit take it down level with the rest of the plastic.
DSC00753.JPG
DSC00754.JPG
First your just gonna make a rough cut to get the shovel out of the way (using a cut off wheel on your dremmel)
DSC00744.JPG
DSC00745.JPG
DSC00746.JPG
DSC00747.JPG
DSC00750.JPG
Now your gonna make a more precise cut be careful on this one you dont wanna go to deep.
DSC00752.JPG
then hit it with a sanding bit take it down level with the rest of the plastic.
DSC00753.JPG
DSC00754.JPG
Comment