Ad Widget

Collapse

Announcement

Collapse
No announcement yet.
X

where to buy mikuni jets?

Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • where to buy mikuni jets?

    I went to put in my factory pro jet kit and it recommends using my stock 115 jets with my RS-3 exhaust. The previous owner installed a dynojet kit so I don't have the stock jets. I tried the 117 jets but I think they are a little rich. I found some jets on amazon but not sure they fit. [ame="http://www.amazon.com/Mikuni-Carb-Small-Round-KN102-221/dp/B0022ZUY0W/ref=sr_1_cc_3?s=aps&ie=UTF8&qid=1342308299&sr=1-3-catcorr&keywords=mikuni+jet+115"]http://www.amazon.com/Mikuni-Carb-Small-Round-KN102-221/dp/B0022ZUY0W/ref=sr_1_cc_3?s=aps&ie=UTF8&qid=1342308299&sr=1-3-catcorr&keywords=mikuni+jet+115[/ame]. Or does anyone have any extra? The bike is a 1999 750 katana.
    1993 Kat 600 & 1999 Kat 750

  • #2
    Try here http://www.pjmotorsports.com/index.html or PM Arsenic and see if he has any for sale
    Ride like it's your last ride
    sigpic

    Comment


    • #3
      A 1999 Katana 750 doesn't use 115 main jets stock. It uses 117.5 main jets stock. Other than that, the 115's you linked at Amazon.com are the correct jets. Like I said a 1999 Katana 750 is 117.5 stock, not 115.
      Last edited by arsenic; 07-15-2012, 09:11 PM.

      Comment


      • #4
        You are right. I was thinking the one I was missing was smaller not larger.
        1993 Kat 600 & 1999 Kat 750

        Comment


        • #5
          Do you need a set of 4 117.5 main jets or do you have them?

          Comment


          • #6
            I don't have them but I may not need them. I put in the fp kit using the 115s and it felt rich in from 5-7k at least. I couldn't decide if it was rich above 7k. I was thinking I had put in 117.5s so I was going to swap them first. But since I already have the smaller ones I will continue down the tuning chart. If I need them I will let you know.
            1993 Kat 600 & 1999 Kat 750

            Comment


            • #7

              Comment

              Working...
              X