Safety switch

[bwillis726]

So as I was riding today, my clutch cable snapped. I got the bike home and started to tear into it. I took the clutch lever off, then thought I should put it back on. As I did that I pulled the lever in to make sure it was squared away. In doing that something snapped. And I read on here about the safety switch. Went to fire the bike up, and it won't start. So in reading all of this will I need to buy a whole new ignition or is there something else I can get.


Thanks, brian

[92xjunker]

you can bypass the switch at the connections under the tank. just unplug the switch from the harness and plug the harness into each other.

[bwillis726]

Thanks, you guys are very helpful and knowledgeable in all this stuff