OK - I changed my chain and sprockets and I'm putting the rear wheel on. I do not know if I'm missing the left wheel spacer (sprocket side) or not. I ordered another one but it is identical to something that is already on the wheel. I have a diagram that shows a ring holding the bearing in (which appears to be there on my bike) and then the wheel spacer. When I puy the wheel spacer in, it fits on top of the bearing (and bearing spacer) and ends up being flush with the wheel. When everything is bolted up, the wheel is flush with the swing arm - nothing in between. It rotates but there is barely any clearance between the bolts that hold the sprocket on and then swing arm.
Can anyone give me some input here? Possibly check your bike and see if there is a visible spacer on the spocket side or if the wheel/hub assembly sits flush with the left swing arm?
Thanks.
Can anyone give me some input here? Possibly check your bike and see if there is a visible spacer on the spocket side or if the wheel/hub assembly sits flush with the left swing arm?
Thanks.
Comment