I did an experiment on an extra body piece I had lying around. I sprayed it with rattle can acrylic laquer, then used high temp engine enamel clear coat on it. I did this sometime last fall and just today I buffed up the paint on it, polished and doused it in gas. I let it set for 10 minutes with gas completely pooling on it and it showed NO signs of wrinkling. This clear coat also is thicker and to my naked eye looks as shiny and good as the bc/cc that is on my bike. I need to repair a chip on my tank and will be using this clear coat. I'm not sure if it was been gas resistant right away or if the 6 month cure is what did it.
Here is polished before the gas..........
Here is after the gas, a little less shine but still a good finish...
Here is polished before the gas..........
Here is after the gas, a little less shine but still a good finish...
Comment