Great looking bike! Good luck with the rest of your build.
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Wish I could see the pics -_-
Gov computers suck.I have embarked on the road of modding. Even if you BOLT ON new parts to a bike, there will be someone somewhere that has the same combination. With the Kat, you have a unique platform. Sure, some parts might be from other bikes, but no one will have the same combination. It will be truly yours and unique.
-Unholy m-Current project: Un-Katchable
sigpic
Comment
-
You can't post pictures from your local computer to the site...-Steve
sigpic
Welcome to KatRiders.com! Click here to register
Don't forget to check the Wiki! http://katriders.com/wiki
Comment
-
Originally posted by Gsx750fp View Posti know thats the url for the picture.....copy/paste
nvmd
how about this
Close, but not quite. You have the entire wedge cut on one side or the other of the center lines that are 2" apart. You should split the difference on those.
In other words... draw 2 lines 2" apart. Measure 1/16" either side of the lines to create the wedge shape.
If the wedge is all on one side, then when you bend to close the gap the edges will not be in line with each other.
krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Comment
-
Originally posted by Gsx750fp View Postokay so the 90 degree lines are jus for reference and should be the center of the angle for the wedge...
Correct... the 2 lines are 2" apart, parallel to the pilot bolt... and used for reference on cutting the wedges.93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Comment
-
Originally posted by Gsx750fp View Postbut wouldnt that make the open face of the wedge 1/8?
Sorry, your right.. 1/8" either side... For sure the total is 1/4" at the widest part of the wedge cut.
krey93 750 Kat
Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736
"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Comment
Comment