Here's a few pics of how my swingarm swap is going. I should have it back together by the weekend. Just got to get my new springs for the forks & an ignition advancer. Can you tell any difference by adding the advancer? I have a Vance & Hines SS2r exhaust, k&n pods, & a stage 3 jet kit already. Thanks
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Something to keep in mind is your exhaust. A wider swingarm is probably going to hit your pipe. I just figured that I had enough room but that wasn't the case. I had to take the tip off my Vance & Hines turn it upside down & then run the pipe with the bracket on the outside. It dosen't look bad just keep it in mind.
Comment
-
i put a 1100 swing arm in. it fits but had to do a little grinding. its about a 1/4 inch wider then the 600. i am using the same tires for now but i am going to get a little bit of a wider rim here shortly. a 750 swing arm fits right in but is an inch longer. (1100 is the same length). everything else just bolts right in. if you go with the 750 swing arm you will need to buy a longer chain.your suzuki qualified tech
flinstone little block mod
Comment
Comment