KOTM Jun 2008 antditty3436
 

Welcome to the KatRiders.com forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   KatRiders.com > Service Department > Mechanics 101

Mechanics 101 Can't get it to run right? Find a trick to add HP?
From the first oil change to completely rebuilding the engine,
this is the place to talk about the heart of the beast!


Reply
 
Thread Tools Display Modes
Old 06-09-2006, 01:31 PM   #1
isaacl
Chicken Strip
 
Join Date: May 2006
Posts: 13

Default will 1993 Suzuki Katana 600 header fit my 1994 750 katana?

will 1993 Suzuki Katana 600 header fit my 1994 750 katana?
isaacl is offline   Reply With Quote
Old 06-09-2006, 07:19 PM   #2
paradoxmd
Kat Champion
 
paradoxmd's Avatar
 
Join Date: Nov 2005
Location: Austin, TX
Posts: 2,278

Default

yeah it should fit, but i think the 600 headers are a little more constrictive in terms of airflow.
__________________

Long Live the D
paradoxmd is offline   Reply With Quote
Old 06-09-2006, 08:29 PM   #3
6ixShooter
Squid
 
6ixShooter's Avatar
 
Join Date: Jun 2006
Location: Savannah
Posts: 47

Default

Well Paradox got to it before I did, but yes it should fit just fine and it will be more restrictive.........make sure you get good quality gaskets!
__________________
Viva La PBR Tall Boy! And Balls on your forehead!
6ixShooter is offline   Reply With Quote
Old 06-10-2006, 07:08 PM   #4
The CyberPoet
Cloud Rider
 
The CyberPoet's Avatar
 
Join Date: Oct 2004
Posts: 26,618
eBay ID: MotorcycleAnchor, and TheCyberPoet

Default

You'll lose 23% of the cross-sectional area, if the differences between the 600 and 750 headers are the same on the pre-98's as they are on the 98+ units. Dremeling out the weld seams will offset most of that change. You may find your bike runs rich as a result, and may need to lean out the pilot screws 1/8th of a turn as a result.

In general, you'll get more low-end torque (up to about 6k) but lose power at the upper-end (above about 8k).

Cheers,
=-= The CyberPoet
__________________
Remember The CyberPoet
The CyberPoet is offline   Reply With Quote
Old 03-15-2009, 10:51 AM   #5
yz4life
Skid Mark
 
Join Date: Mar 2009
Location: buffalo and Y
Posts: 2

Default

My 93 600 I got 4 nothing came w duels n my 95 750 came w a single. Didn't the duals only come on the 1100
yz4life is offline   Reply With Quote
Old 03-15-2009, 11:37 AM   #6
unclebeaner
Poser
 
unclebeaner's Avatar
 
Join Date: Mar 2009
Posts: 78
eBay ID: unclebeaner86

Default

no pre 600 have dual cans, whats wrong with 750 header?
__________________
still screwing with junk
unclebeaner is offline   Reply With Quote
Old 03-15-2009, 12:08 PM   #7
Kreylyn
Kat King
 
Kreylyn's Avatar
 
Join Date: Nov 2008
Location: Weaverville, NC
Posts: 15,843
eBay ID: Kreylyn

Default

To clarify, are both stock headers or is one set aftermarket?

Both 600 and 750 pipes can bolt onto each other no problem.

Stock sizes on the 600 will be a little smaller, and not work well. On the other hand, putting a 750 header on a 600 will open it up a bit.

Aftermarket can be different.

For example, I am currently running after market 600 headers on my bike that match the size of the 750 stock pipes.

More info would be needed to fully understand your sitiuation.

88 -97 Pre 600 and 750 stock exhausts were dual exhaust setups. If you have a 4-1 on a pre, it's an aftermarket header.

Krey
__________________
93 750 Kat



Modified Swingarm, 5.5 GSXR Rear with 180/55 and 520 Chain, 750 to 600 Tail conversion, more to come. Long Term Project build thread http://katriders.com/vb/showthread.php?t=96736

"I've done this a thousand times before. What could possibly go wron.... Ooops!"
Kreylyn is offline   Reply With Quote
Sponsored Links
Reply

  KatRiders.com > Service Department > Mechanics 101

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
1994 suzuki katana 750 problem stevend135 Mechanics 101 1 07-14-2007 12:14 AM
2001 Suzuki Katana Header Pipe on a 1994 Kat ? Sizzler Mechanics 101 1 05-10-2006 11:54 AM
Brake swaps from 1992 katana 750 to 1993 katana 1100 Anonymous Mechanics 101 1 05-24-2005 04:25 PM
1994 Katana 600 - Help getting her to run Boatguy3371 Mechanics 101 16 05-04-2005 12:28 PM

All times are GMT -5. The time now is 05:55 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Katriders.com, Copyright ©2004 - 2018

Like Cigars? Check out Vitola.org