how to remove cables from carbs

delkampg · 05-31-2008, 10:02 PM

ok so im sitting here with my carbs almost off i just cant figure out how to remove starter cable and the throttle cable.

arsenic · 05-31-2008, 10:04 PM

pull

delkampg · 05-31-2008, 10:53 PM

what if one of the screws on the black cap are striped

PilotC150 · 05-31-2008, 11:08 PM

Quote:

Originally Posted by delkampg

what if one of the screws on the black cap are striped

After making sure the carbs are dry (no fuel) you can use a rotary tool (dremel) to cut a slot in the screw and use a flathead screwdriver to remove the screw.

arsenic · 05-31-2008, 11:13 PM

I have allen replacement screws for the 98+ diaphragm cap screws you're referring to.

delkampg · 05-31-2008, 11:42 PM

i cant find the pilot screw. do you have to drill to get to it?

arsenic · 05-31-2008, 11:46 PM

uuummm... yeah

delkampg · 06-01-2008, 12:09 AM

o hell. i really dont feel comfy doing that. if i really have to i will, do i? if i do what size bit? and what does he mean (in carbs 101) gray plastic diaphragms

ok nevermind there drilled out, but i still need to know what the gray diaphragms is

arsenic · 06-01-2008, 12:11 AM

the caps or the diaphragm themselves?

delkampg · 06-01-2008, 12:14 AM

Remove the pilot jets. They are seated down in the tubes where those pesky little rubber plugs came from, remember?!
(Sometimes these stick in place, so PUSH HARD when you first start to turn)

* Turn the carbs over and now remove the light gray plastic diaphragms.
(I like to screw in a jet or a similar size bolt and tap them out a bit – they are seated in tight and actually held in place with the threads between the main jets and the emulsion tubes.)

thats where im stuck also could i have turned the screws when i was drilling? 1 and 4 are the same and 2 and 3 are the same (position wise i havnt taken the out yet.)
and also i drilled into the first screw. it turned it all the way in. i didnt touch 2 but looks lie i knicked the rest. are they all the same turn?

05-31-2008, 10:02 PM	#1
delkampg Tank Slapper Join Date: May 2008 Location: coolidge, AZ Posts: 465 iTrader: (0) My Photos My Garage	how to remove cables from carbs ok so im sitting here with my carbs almost off i just cant figure out how to remove starter cable and the throttle cable. __________________ 99 katana 600- sold, but not forgotten 06 yamaha yzf600r- down for the count 06 Honda CBR 600rr- current bike lord, please let me be the person my dog thinks i am

05-31-2008, 10:53 PM	#3
delkampg Tank Slapper Join Date: May 2008 Location: coolidge, AZ Posts: 465 iTrader: (0) My Photos My Garage	what if one of the screws on the black cap are striped Last edited by delkampg; 05-31-2008 at 10:59 PM.. Reason: Automerged Doublepost

05-31-2008, 11:46 PM	#7
arsenic I couldn't let it go, so now I'm gone. Join Date: Nov 2004 Location: 60505 Posts: 11,119 iTrader: (98) My Photos My Garage eBay ID: arsenic1016	uuummm... yeah Last edited by arsenic; 05-31-2008 at 11:51 PM..

06-01-2008, 12:09 AM	#8
delkampg Tank Slapper Join Date: May 2008 Location: coolidge, AZ Posts: 465 iTrader: (0) My Photos My Garage	o hell. i really dont feel comfy doing that. if i really have to i will, do i? if i do what size bit? and what does he mean (in carbs 101) gray plastic diaphragms ok nevermind there drilled out, but i still need to know what the gray diaphragms is Last edited by delkampg; 06-01-2008 at 12:09 AM.. Reason: Automerged Doublepost

06-01-2008, 12:14 AM	#10
delkampg Tank Slapper Join Date: May 2008 Location: coolidge, AZ Posts: 465 iTrader: (0) My Photos My Garage	Remove the pilot jets. They are seated down in the tubes where those pesky little rubber plugs came from, remember?! (Sometimes these stick in place, so PUSH HARD when you first start to turn) * Turn the carbs over and now remove the light gray plastic diaphragms. (I like to screw in a jet or a similar size bolt and tap them out a bit – they are seated in tight and actually held in place with the threads between the main jets and the emulsion tubes.) thats where im stuck also could i have turned the screws when i was drilling? 1 and 4 are the same and 2 and 3 are the same (position wise i havnt taken the out yet.) and also i drilled into the first screw. it turned it all the way in. i didnt touch 2 but looks lie i knicked the rest. are they all the same turn? Last edited by delkampg; 06-01-2008 at 12:22 AM..

05-31-2008, 10:04 PM	#2
arsenic I couldn't let it go, so now I'm gone. Join Date: Nov 2004 Location: 60505 Posts: 11,119 iTrader: (98) My Photos My Garage eBay ID: arsenic1016	pull

05-31-2008, 11:13 PM	#5
arsenic I couldn't let it go, so now I'm gone. Join Date: Nov 2004 Location: 60505 Posts: 11,119 iTrader: (98) My Photos My Garage eBay ID: arsenic1016	I have allen replacement screws for the 98+ diaphragm cap screws you're referring to.

05-31-2008, 11:42 PM	#6
delkampg Tank Slapper Join Date: May 2008 Location: coolidge, AZ Posts: 465 iTrader: (0) My Photos My Garage	i cant find the pilot screw. do you have to drill to get to it?

06-01-2008, 12:11 AM	#9
arsenic I couldn't let it go, so now I'm gone. Join Date: Nov 2004 Location: 60505 Posts: 11,119 iTrader: (98) My Photos My Garage eBay ID: arsenic1016	the caps or the diaphragm themselves?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cables, tubes etc. (where they should go)	davepol	Mechanics 101	2	02-28-2008 04:45 PM
So I'm an idiot..How do I remove the Throttle Cables?	Ian	Mechanics 101	19	06-13-2007 05:47 PM
Hot Battery Cables	JIMMYD	Mechanics 101	14	04-29-2007 02:00 PM
cables...	93kat750	Mechanics 101	5	04-07-2006 09:35 AM
Lubricating Cables	SVTim	Mechanics 101	3	03-16-2005 08:06 AM