OK. So I am upgrading my lighting to projectors with HID's I'm not that good with wiring and would like to put in a time delay relay so I do not burn out the ballasts when I start the bike and also I read about putting in a cap between the hi/lo feeds to prevent the headlight from going out when switch hi to lo. Can someone provide me with a basic wiring diagram for the time delay relay setup. Thanks
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
I have installed BMW Projectors following Uno "I wear sunglasses at night" and I do not think the HIDS are controlling the shutter opening when I hit the Hi beams on. I believe it is in the Kats wiring I think I read somewhere that you momentarily lose power to the ballasts when you go from lo to hi beams cause them to shut down and that installing a diode fixes that.
I ordered a TDR and was hoping I'm on the right track with the diode.Ride like it's your last ride
sigpic
Comment
-
Wiring issue with the relay, you're not feeding any part of the low beam with the light switch are you. That will kill the light when high beam is activated."I'm sorry, I didn't mean to upset you when I called you stupid. I thought you already knew..."
spammer police
USAF veteran
If your a veteran, join the KR veterans group
Comment
-
Comment
-
When you switch from low to high beam it cuts power to the one not needed. Use power from the center light to power the TD and relay for low beam (constant lamp) this is only for shutter high beam."I'm sorry, I didn't mean to upset you when I called you stupid. I thought you already knew..."
spammer police
USAF veteran
If your a veteran, join the KR veterans group
Comment
-
but if I do the second diagram by loudnlow http://katriders.com/vb/showthread.p...Hid%27s&page=5 with 2 relays using the tdr in the low beam circuit and the standard for the shutter that would work right?Ride like it's your last ride
sigpic
Comment
-
Ok so now a new problem. Because I installed the TDR when I switch to hi the shutter opens but when I switch back to lo I have to wait for the TDR to cycle thru the delay time before the headlight will come back on. Any suggestionsRide like it's your last ride
sigpic
Comment
-
What's your projector setup. I am hugely curious about that. I just wired mine normally and they worked But I have having some issues now with the right side headlamp socket not getting power. I don't need hi beams any more with the HIDS99 Katana GSX600F -03 Bandtana GSX1200F- 06 Charger Daytona R/T
The Tallest KAT Rider.. Out there! PERIOD.
Comment
-
Sucess I installed a in4004 diode between the hi and lo trigger. HIDS now stay on through both cycles hi/lo. Nbx33 I followed UNO s I wear my sunglasses at nite write up for mounting projectors in my headlight assemblyRide like it's your last ride
sigpic
Comment
Comment