'95 600 frame, '95 750 engine. All connections have been made correctly to the best of my knowledge and after several hours staring at a wiring diagram. However, when I tun the key the oil/neutral lights turn on but the headlight doesn't. The turn signals don't work, the starter button doesn't work, the high beam indicator doesn't turn on when I flip the headlight switch, and the horn doesn't work. Neither pigtail was touched when I swapped the engines, and all the fuses in the fuse panel check out. I'm getting confused to the point of frustration; is there anything I'm missing?
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
X
-
Main breaker? It's ont the right side of the battery box between the tank and battery box. It has a red dot on top of it, push that dot. If it's tripped it will click when pushed."I'm sorry, I didn't mean to upset you when I called you stupid. I thought you already knew..."
spammer police
USAF veteran
If your a veteran, join the KR veterans group
-
Either I'm looking in the wrong place, or this bike doesn't have one of those.
It should be right here, correct? (looking backwards at the front of the battery box)
There are these on the other side, but they look to be relays and don't have any buttons on them.
The right-hand side of the battery box only has what looks like the starter solenoid. Again, no buttons.
Am I insane, or has it gone missing during the swap or something?Last edited by thebook92; 03-04-2015, 05:25 PM.1995 600 w/ 750 swap (aka the cause of 90% of my current headaches)
Comment
-
Are you sure everything is plugged in and plugged in fully. No bent or unseated pins.Last edited by 92xjunker; 03-04-2015, 05:30 PM."I'm sorry, I didn't mean to upset you when I called you stupid. I thought you already knew..."
spammer police
USAF veteran
If your a veteran, join the KR veterans group
Comment
-
When I took those pictures I unplugged and re-plugged in everything I removed when doing the swap, just in case. A quick glance at that which I could see showed none to very little corrosion on anything.Last edited by thebook92; 03-04-2015, 05:34 PM.1995 600 w/ 750 swap (aka the cause of 90% of my current headaches)
Comment
-
Your going to have to trace the source through the loom. Something is a mis, if it worked before the swap. There is a small neg at the battery that plugs in, is it?Last edited by 92xjunker; 03-04-2015, 05:54 PM."I'm sorry, I didn't mean to upset you when I called you stupid. I thought you already knew..."
spammer police
USAF veteran
If your a veteran, join the KR veterans group
Comment
-
It's plugged in, yes. I was hoping I wouldn't have to start digging through the wiring harness, but it seems like it's my only option right now. I'm assuming I'll have to look for a short to ground or open somewhere; any suggestions on where to start?1995 600 w/ 750 swap (aka the cause of 90% of my current headaches)
Comment
-
I had to walk away from this for a while due to life getting in the way. Turned out the other end of the plug at the negative battery terminal was corroded, and now she cranks over beautifully. Won't start yet, but I can probably diagnose it from here. Thanks for the help.1995 600 w/ 750 swap (aka the cause of 90% of my current headaches)
Comment
-
Originally posted by thebook92 View PostI had to walk away from this for a while due to life getting in the way. Turned out the other end of the plug at the negative battery terminal was corroded, and now she cranks over beautifully. Won't start yet, but I can probably diagnose it from here. Thanks for the help.
Comment
Comment