HELP! Need Clear Tail Light lens for 1995 Katana 750

[james30263]

I own a 1995 Suzuki Katana 750 that I'm still working on bringing back to life. One of the mods I want is an intergarated tail light or a clear tail light lens but I cant seem to find one anywhere. Does anyone know where to find them at?

[Black_peter]

Posted in the 1100 one.

They don't exist as far as I know..

[james30263]

Have you ever heard of any one making thier own lens cover? If so how did they do it?

[chinto]

Have you ever heard of any one making thier own lens cover? If so how did they do it?

http://katriders.com/vb/showthread.php?t=74335&highlight=integrated+tail+light

Jax is working on one, he may be able to offer some assistance

[paradoxmd]

He was just working on a circuit board to use in the stock housing.

[Black_peter]

If you have the skills you can vacuum form a new lens..

[OBrian-DK]

If you are looking for LED for your GSX 600/750 F then theese fits right in and only need for some small adjustments to the back.

Cut away the small peace without leds in top and it fits right in.


this is for the DUC. but it fits.

http://clearalternatives.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=CA&Product_Code=LED-61-L&Category_Code=LED

Look at my friends bike. And how he did it.

http://www.motorcykelgalleri.dk/html/alb_vis.asp?AlbumID=3640

Here it's with brake on





Maybe it would be an idea

[james30263]

Will this work for the 750 model since the tail lights are different?

[Black_peter]

Will this work for the 750 model since the tail lights are different?

It will look a little thin. If you could get two of those! Bonus!!
I may go that route depending on price..

$40! Never mind.. I'll make one, the one I have now only cost about $15..

I might use this one:

http://clearalternatives.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=CA&Product_Code=LED-77-L&Category_Code=LED

Or this one:

http://clearalternatives.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=CA&Product_Code=LED-66-L&Category_Code=LED

On the 750..

[kwebbel]

Easy to make one yourself (even with integrated blinkers!) for a fraction off that price.

36 highpower LEDs (with integrated blinkers 60), 4 diodes, 15 resistors (with i.b. 21) and a piece off printboard 80X45 mm (with i.b.155x45 mm) some wires, patience and a soldering gun that's all you need.

[Jax]

The 750's have a different tail than the 600's...I think they are a bit easier to make because the 750 is a larger tail light...like kwebbel said you can do it for cheap and actually have integrated blinkers done...I bought all my LED's off of ebay and have had good luck with them...

[kwebbel]

With integrated blinkers

[Black_peter]

Are the diodes for the blinkers?

[kwebbel]

yes and for the brake/taillights, I can supply you with a scheme aso, just let me know

[scottynoface]

i would be interested in that kwebbel, possible to send me one? pleeeease