[shpielers]

If it's too wide, just do 2 layers?

[maniac1886]

that crossed my mind. I thought about staggering two layers. I have it coiled up and it looks good, but when i look at one layer, It looks like the holes are too big and theres not enough metal there. I want to paint them blue when I install it but im afraid there isnt enough material there to get the desired effect. Im going to cut out a square of it and mock it up and probably submit pictures for KR feedback. it was only $9 so i dont like one layer, and then also dont like the staggered layers then Ill just buy some different mesh. I was thinkin after I bought it that Autozone might carry mesh as well. They have a little rice burner section with all the aesthetics stuff.

[Purplehaze]

Personally I wouldn't worry about a hole for an idle adjuster. If you're not carrying around a screwdriver as part of your toolkit already you need to add one.

[Aaron-71]

Just picked up some steel lath from home depot for $9. Im a little concerned that the holes are going to be too big. It is 27 in wide, and 8 ft long so I think im going to cut a piece off and mock it up and see how it looks....

http://www.homedepot.com/p/Unbranded...LATH/202093395

I agree, doesn't look bad, but the holes are a bit big. If they were about 75% of the size, it'd look a lot better.

Personally I wouldn't worry about a hole for an idle adjuster. If you're not carrying around a screwdriver as part of your toolkit already you need to add one.

I've always got tools on me . Always have since the last time I put my carbs on my bike from adjusting the valves.... while down a busy highway, my throttle cables came loose from the carbs because I didn't tighten everything down.

Had to get a friend to bring me some tools and redneck it until I could take the tank off at home . Won't be doing that again!

[JaxKat]

2019 ... Update... I did this back in 2006...
13 years later it is still turning heads while the Mesh Mod is still shiny and no cracks with no heat issues.
She still looks brand new...

[JaxKat]

And now it wont let me post any new pics...

[steves]

Hey, sorry we're working on that.

You can upload a photo to something like Imgur and then post the link.

[JaxKat]

[JaxKat]